Computer Input
Manual PC Adjustment
Some computers employ special signal formats which may not be tuned by
✔Note: The PC Adjust Menu cannot be operated when the digital signal input on the DVI terminal is selected on PC System Menu.
1 | Press the MENU button to display the |
the Point 7 8 buttons to move the red frame pointer to the | |
| PC Adjust Menu icon. |
2 | Use the Point ed buttons to move the red frame pointer to |
the desired item and then press the SELECT button to display |
the adjustment dialog box. Use the Point 7 8 buttons to adjust the setting value.
Fine sync
Use the Point 7 8 buttons to adjust the value, eliminating a flicker from the image displayed (from 0 to 31).
Total dots
Use the Point 7 8 buttons to adjust the number of total dots in one horizontal period to match your PC image.
Position H
Use the Point 7 8 buttons to adjust the horizontal picture position.
Position V
Use the Point 7 8 buttons to adjust the vertical picture position.
Current mode
Press the SELECT button to show
Clamp
Use the Point 7 8 buttons to adjust the clamp level. When the image has dark bars, try this adjustment.
Display area H
Use the Point 7 8 buttons to adjust the horizontal area displayed by this projector.
Display area V
Use the Point 7 8 buttons to adjusts the vertical area displayed by this projector.
PC ADJUST MENU
PC Adjust Menu icon
Move the red frame pointer to the desired item and press the SELECT button.
Status (Stored/Free) of the
Selected Mode.
Selected Mode
Press the Point 7 8 buttons to adjust the value.
Press the SELECT button at this icon to adjust “Clamp,” “Display area H,” or “Display area V.”
Current mode
Press the SELECT button at Current mode icon to show the information of the connected computer.
Press the SELECT button at this icon to display the previous items.
36