Christie Digital Systems 103-012100-01 user manual Appendix Indicators

Appendix

			Indicators					Projector Condition
POWER		LAMP		WARNING	WARNING		LAMP
green		red		TEMP.		FILTER	REPLACE
				red		orange	orange
								The projector has been cooled down enough and the
						✽	v	temperature returns to normal. When turning on the projector,
								the WARNING TEMP. indicator stops blinking. Check and
								replace the filter.
								The lamp cannot light up. (The projector is preparing for stand-
						✽		by or the projection lamp is being cooled down. The projector
								cannot be turned on until cooling is completed.)
								The lamp cannot light up. (The lamp has been cooled down
						✽		enough and the projector is in stand-by mode and ready to be
								turned on with the ON/STAND-BY button.)
								The lamp has been used overtime. Replace the lamp
						✽		immediately and then reset the lamp counter. The indicator
								will be turned off after resetting the counter.
							v	If the Filter counter reached a time set in the timer setting,
								a Filter replacement icon (Fig.2) appears on the screen and
								the WARNING FILTER indicator on the top panel lights up.
								Replace the filter as soon as possible. If the filter is out of
								scroll and the projector reaches a time set in the timer setting,
								Fig. 3 appears on the screen and the WARNING FILTER
Fig..2	Filter replacement icon							indicator lights up. Replace the filter cartridge as soon as
								possible.
								If the filter is clogged and no scroll is left in the filter cartridge,
								a Filter cartridge replacement icon (Fig.4) appears on the
Fig..3								screen and the WARNING FILTER indicator lights up. Replace
								the filter cartridge as soon as possible.
								✔Note:
								• Fig.2, Fig.3 and Fig.4 icon will not appear when the Display function
Fig..4	Filter cartridge replacement icon							is set to “Off” (p.48), during “Freeze” (p.28), or “No show” (p.29).
								The filter cartridge is not installed in the projector. Check the
								filter compartment to see if the filter cartridge is installed in
								the projector. When the filter cartridge is installed and the
								indicators continue to light and blink, read the column below.
								The projector detects an abnormal condition and cannot be
								turned on. Unplug the AC power cord and plug it again to turn
								on the projector. If the projector is turned off again, unplug the
								AC power cord and contact the dealer or the service center.
								Do not leave the projector on. It may cause an electric shock
								or a fire hazard.

]When the filter detects clogging, reaches a time set in the timer setting or runs out of the filter scroll, the WARNING FILTER indicator lights orange. When this indicator lights orange, replace the filter or the filter cartridge with a new one promptly. Reset the Filter counter after replacing the filter (p.58). Reset the Filter counter and Scroll counter after replacing the filter cartridge (p.58).

v When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights orange. When this indicator lights orange, replace the projection lamp with a new one promptly. Reset the lamp counter after replacing the lamp (p.59).

70