04Controls and displays
Display
1 |
| 2 | 3 | 4 | 5 | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1112
1 SIGNAL SELECT indicators
Lights to indicate the type of input signal assigned for the current component:
AUTO : Lights when AUTO signal select is on.
DIGITAL : Lights when a digital audio signal is detected.
2DIGITAL : Lights when a Dolby Digital signal is detected.
ANALOG : Lights when an analog signal is detected.
DTS : Lights when a source with DTS audio signal is detected.
SB : Lights when a source (such as
2
When the Standard mode of the receiver is on, this lights to indicate decoding of a DTS signal.
3 2 DIGITAL
When the Standard mode of the receiver is on, this lights to indicate decoding of a Dolby Digital signal.
6 | 7 | 8 | 9 | 10 |
13 | 14 | 15 |
4 2 PRO LOGIC II
When the Standard mode of the receiver is on, this lights to indicate Prologic II decoding.
5 VIR.SB
Lights during Virtual surround back processing.
6 DIRECT
Lights when source direct playback is selected. Direct playback bypasses the tone controls and channel levels for the most accurate reproduc- tion of a source.
7 MIDNIGHT
Lights during Midnight listening.
8 SLEEP
Lights when the receiver is in sleep mode.
9 ATT
Lights when INPUT ATT is used to attenuate (reduce) the level of the input signal (can only be used with an analog signal).
10 Speaker indicator
Shows if the speaker system is on or not.
SP 3A means speakers are switched on. SP 3 means the headphones are connected.
24
En
