Pioneer D514 Connecting DVD 5.1 channel components, Connecting video components, Connecting up

03 Connecting up

Connecting DVD 5.1 channel components

If you prefer to use a seperate component for decoding DVDs, you can connect a decoder or a DVD player with multi-channel analog outputs to the multi-channel inputs of this receiver.

When connecting your equipment, always make sure the power is turned off and the power cord is disconnected from the wall outlet.

CENTER

OUTPUT

SUBWOOFER

OUTPUT

SURROUND

OUTPUT	DVD/multi-channel decoder
VIDEO	with 5.1 channel analog
	output jacks
OUTPUT
FRONT
OUTPUT

The arrows indicate the direction of the signal.

The 5.1 channel input can only be used when DVD 5.1 ch is selected (see page 30).

Connecting video components

Connect your video components to the jacks as shown below. Regarding digital video components (like a DVD player), you must use the connections pictured on this page for the video signal, but in order to hear a digital source (like a DVD) you should hook up the audio to a digital input (see previous page). It is also a good idea to hook up your digital components with analog audio connections (see previous page).

When connecting your equipment always make sure the power is turned off and the power cord is disconnected from the wall outlet.

VSX-D514 only – For better quality video, you can hook up using the component video jacks or the S- video jacks on the rear of the receiver instead of the regular video jacks. Make sure you connect to your TV in the same way that you’ve connected to your other video components.

14

En

AUDIO

INPUT

VIDEO

INPUT

S-VIDEO

INPUT

S-VIDEO

OUTPUT

DVD recorder/

VIDEOVideo deck

OUTPUT

AUDIO

OUTPUT

The arrows indicate the direction of the signal.