07Using the tuner
4Press CLASS to select one of the three classes then press } ] to select the station preset you want.
You can also use the the MULTI JOG dial (front panel) to select a station preset.
5Press ENTER.
After pressing ENTER, the preset class and number stop blinking and the receiver stores the station.
Naming station presets
For easier identification, you can name your station presets.
1Choose the station preset you want to name.
See Listening to station presets (this page) for how to do this.
2If you’re using the remote control, press RECEIVER.
3Press TUNER EDIT.
The display shows ST. NAME, then a blinking cursor at the first character position.
4Input the name you want.
Names can be up to four characters long.
•Use the front panel MULTI JOG dial or the remote control } ] buttons to select characters.
•Press ENTER to confirm a character. If no character is input, a space is input.
•The name is stored when ENTER is pressed after choosing the fourth character.
•To erase a station name, simply repeat steps
40
En
•Once you have named a station preset, you can press DISPLAY when listening to a station to switch the display between the name and the frequency.
Listening to station presets
Having stored up to 30 stations (see previous page), preset stations can be easily recalled.
1Press the AM or FM buttons to select the tuner.
2Press CLASS to select the class in which the station is stored.
Press repeatedly to cycle through classes A, B and C.
3Press STATION +/– to select the station preset you want.
•If the receiver is left disconnected from the AC power outlet for an extended period, the station memories will be lost and will have to be reprogrammed.
