06Setting up the receiver
Component video input settings (page 35)
Specify the components to be assigned to the component video inputs (below).
•Component video 1 input setting
•Component video 2 input setting
Digital input settings (page 35)
Specify the components to be assigned to the digital inputs (below).
•Coaxial digital input 1 setting
•Coaxial digital input 2 setting
•Optical digital input 1 setting
4Use ’ or ‘ to adjust the setting. The setting is entered automatically.
5Repeat steps 3 and 4 to set other surround modes.
6When you’re done, press ENTER to exit.
The setting display is automatically exited after 3 minutes of inactivity.
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
|
|
|
|
| |||
|
| ||||||
|
|
|
| ||||
|
|
|
|
|
| ||
|
| ||||||
|
|
|
|
|
| ||
FL-CS-S FL-CL-SL
FL-CS-SL FL-CL-S
•If the cone size (diameter) of the speaker is larger than 5 inches, set the speaker size to L.
•If you’re not using a subwoofer, we recommend setting the front speakers to L.
32
En
Speaker setting
•Default setting: S (all speakers)
You must let the receiver know how many speakers you have, and how big they are. The size you choose (large or small) determines how much bass is sent from the receiver to the speakers.
In the display, F, C, and S refer to front, center, and surround speakers respectively. Speaker size is denoted as L for large speakers, S for small speakers, and 
(asterisk) if no speaker is connected.
•Cycle through the available choices using ’ or ‘ and choose a configuration that matches your speaker setup.
One of the following configurations should match your setup:
Subwoofer setting
•Default setting: YES
You can choose whether the subwoofer is used or not. Use the plus (PLUS) setting for extra bass.
•Use ’ or ‘ to select a subwoofer setting:
YES
Sends bass frequencies from the small (S) speakers to the subwoofer.
PLUS
Sends bass frequencies from all speakers to the subwoofer (L speakers will also output bass).
NO
No bass frequencies are sent to the subwoofer.
