Christie Digital Systems 103-012100-01 user manual Indicators and Projector Condition

Appendix

Indicators and Projector Condition

Check the indicators for the projector condition.

The projector is operating normally..

		Indicators				Projector Condition
POWER	LAMP		WARNING	WARNING	LAMP
green	red		TEMP.	FILTER	REPLACE
			red	orange	orange
				✽	v	The projector is off. (The AC power cord is unplugged.)
				✽	v	The projector is in stand-by mode. Press the ON/STAND-BY
						button to turn on the projector.
				✽	v	The projector is operating normally.
				✽	v	The projector is preparing for stand-by or the projection lamp
						is being cooled down. The projector cannot be turned on until
						cooling is completed and the POWER indicator lights green.
				✽	v	The projector is in the Power management mode.
					v	The filter is scrolled using the FILTER button on the remote
						control or the Filter control function in the setting menu.
						When the filter is being scrolled, the Filter replacement icon
						and “Please wait...” message (Fig. 1) appear on the screen for
						10 seconds.
Fig..1 Filter replacement icon and “Please wait...”
The projector is detecting abnormal condition..
		Indicators				Projector Condition
POWER	LAMP		WARNING	WARNING	LAMP
green	red		TEMP.	FILTER	REPLACE
			red	orange	orange
				✽	v	The temperature inside the projector is elevated close to the
						abnormally high level.
						The temperature inside the projector is abnormally high. The
						projector cannot be turned on. When the projector is cooled
				✽	v	down enough and the temperature returns to normal, the
						POWER indicator lights green and the projector can be turned
						on. (The WARNING TEMP. indicator keeps blinking.) Check and
						replace the filter.

• • • on	• • • blinking at the normal rate
	(approx. 1 second ON,
• • • dim	1 second OFF)
	• • •blinking fast
• • • off	(approx. 0.5 seconds ON,
	0.5 seconds OFF)

• • • blinking slow (approx. 2 seconds ON, 2 seconds OFF)

69