Christie Digital Systems 103-008100-01 user manual Basic Operation Turning OFF the Projector

BASIC OPERATION

	TURNING OFF THE PROJECTOR
1	Press the POWER ON-OFF button on the top control or
	on the remote control, and “Power off?” appears on the
	screen.
2	Press the POWER ON-OFF button again to turn off the
	projector. The LAMP indicator lights bright and the
	READY indicator turns off. After the projector is turned
	off, the cooling fans operate (for 90 seconds). During
		“Power off?” disappears after 4 seconds.
	this “cooling down” period, the projector cannot be
	turned on.
3	When the projector has cooled down, the READY
	indicator lights GREEN again and you can turn

projector on. After cooling down completely, unplug the AC power cord.

TO MAINTAIN THE LIFE OF LAMP, ONCE YOU

TURN THE PROJECTOR ON, WAIT AT LEAST FIVE

MINUTES BEFORE TURNING IT OFF.

DO NOT UNPLUG THE AC POWER CORD WHILE

COOLING FANS ARE RUNNING OR BEFORE THE

READY INDICATOR LIGHTS GREEN AGAIN.

OTHERWISE IT WILL RESULT IN SHORTENING THE

LAMP LIFE.

Note:

•The projector cannot be turned on during the cooling period with the READY indicator turned off. You can turn it on again after the READY indicator becomes GREEN again.

•When the On start function is “On,” this projector is turned on automatically by connecting the AC power cord to an AC outlet. (See page 41 for the On start function.)

•Continuous use may result in shortening the lamp life. Turn off the projector and rest it for about an hour in every 24 hours.

•The running speed of cooling fans is changed according to the temperature inside the projector.

•If the WARNING TEMP indicator blinks RED, see “WARNING TEMP INDICATOR” on page 46.

21