PREPARATION
ADJUSTABLE FEET
Projection angle can be adjusted up to 10.5 degrees with the
ADJUSTABLE FEET.
1 | Lift the front of the projector and pull the FEET LOCK |
|
|
| LATCHES in each side of the projector. |
|
|
2 | Release the FEET LOCK LATCHES to lock the |
|
|
| ADJUSTABLE FEET and rotate the ADJUSTABLE |
|
|
| FEET to a proper height, and tilt. |
|
|
3 | To retract the ADJUSTABLE FEET, lift the front of the |
|
|
| projector and pull and undo the FEET LOCK |
|
|
| LATCHES. |
|
|
| Keystone distortion of the projected image can be |
|
|
| corrected by the Menu Operation. (See pages 22, 38.) | ADJUSTABLE FEET | FEET LOCK |
|
|
| LATCHES |
INSTALLING PROJECTOR IN PROPER POSITION
Install the projector properly. Improper installation may reduce the lamp life and cause a fire hazard.
10˚
Do not tilt the projector more than 10 degrees from side to side.
10˚
Do not put the projector on either side to project an image.
NO SIDEWAYS
10