Christie Digital Systems 103-008100-01 user manual Indicators and Projector Condition, Red

APPENDIX

When a input signal is digital from DVI terminal, refer to the chart below.

ON-SCREEN	RESOLUTION	H-Freq.	V-Freq.	ON-SCREEN	RESOLUTION	H-Freq.	V-Freq.
DISPLAY		(kHz)	(Hz)	DISPLAY		(kHz)	(Hz)

	D-VGA	640 x 480	31.47	59.94	✳	D-SXGA2	1280 x 1024	60.276	58.069
	D-480p	720 x 480	31.47	59.88	✳	D-SXGA+ 1	1400 x 1050	63.97	60.19
		(Progressive)
	D-575p	768 x 575	31.25	50.00		D-720p	1280 x 720	45.00	60.00
		(Progressive)					(Progressive)
	D-SVGA	800 x 600	37.879	60.32		D-720p	1280 x 720	37.50	50.00
							(Progressive)
	D-XGA	1024 x 768	43.363	60.00		D-1035i	1920 x 1035	33.75	60.00
							(Interlace)
	D-WXGA1	1366 x 768	48.36	60.00		D-1080i	1920 x 1080	33.75	60.00
							(Interlace)
	D-WXGA2	1360 x 768	47.70	60.00		D-1080i	1920 x 1080	28.125	50.00
							(Interlace)
	D-WXGA3	1376 x 768	48.36	60.00		D-1080psf/30	1920 x 1080	33.75	60.00
	D-WXGA5	1368 x 768	46.50	50.00		D-1080psf/25	1920 x 1080	28.125	50.00
✳	D-SXGA1	1280 x 1024	63.98	60.02		D-1080psf/24	1920 x 1080	27.00	48.00

✳Depending on the condition of signals and the type and length of cables, these signals may not be properly viewed.

NOTE: Specifications are subject to change without notice.

INDICATORS AND PROJECTOR CONDITION

Check the indicators for projector condition.

	Indicators
				Projector Condition
LAMP	WARNING	READY	LAMP
REPLACE	TEMP.	green	red
yellow	red
				The projector is OFF. (The AC power cord is unplugged.)
✽				The projector is ready to be turned on with the POWER ON-
				OFF button.
✽				The projector is operating normally.
				The Warning Temp. indicator blinks red to let you know the
				internal temperature of the projector exceeds a normal level. If
				the temperature goes up further, the projector will be turned
✽				off automatically and the Ready indicator goes out. When the
				projector is cooled down enough and the temperature returns
				to normal, the READY indicator lights green and the projector
				can be turned on again. (The WARNING TEMP. indicator
				keeps blinking.) Check and clean the air filters.
				The projector is cooled down enough and the temperature
✽				returns to normal. When turning on the projector, the
				WARNING TEMP. indicator stops blinking. Check and clean
				the air filters.
• • • on	• • • blinking		• • • dim	• • • off

55