Christie Digital Systems 103-008100-01 Selecting Computer System, Automatic MULTI-SCAN System

COMPUTER INPUT

WHEN SELECTING INPUT 2 (5 BNC INPUT JACKS )

When connecting a computer output [5 BNC Type (Green, Blue, Red, Horiz. Sync, and Vert. Sync.)] from a computer to G, B, R, H/HV, and V jacks:

1	Press the MENU button to display the On-Screen Menu.
	Press the POINT LEFT/RIGHT buttons to move the red frame
	pointer to the INPUT Menu icon.
2	Press the POINT UP/DOWN buttons to move the red arrow
	pointer to Input 2 and then press SELECT button. A Source
	Select Menu appears.
3	Press the POINT UP/DOWN buttons and a red-arrow icon
	appears. Move the arrow to “RGB,” and then press the

SELECT button.

NOTE:

•INPUT SOURCE changes if the INPUT 2 button on the remote control is pressed.

INPUT MENU

INPUT Menu icon

Move the pointer (red arrow) to Input 2 and press the SELECT button.

Input 2

Source Select Menu

Move the pointer (red arrow) to RGB and press the SELECT button.

SELECTING COMPUTER SYSTEM

AUTOMATIC MULTI-SCAN SYSTEM

This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, SXGA+, WXGA, or UXGA (refer to “COMPATIBLE COMPUTER SPECIFICATIONS” on pages 54–55). When Computer is selected, this projector automatically detects the incoming signal and projects proper image without any additional setting. (Some computers need to be set manually.)

The projector displays one of these: Auto, -----, Mode 1–10, or the system provided in the projector.

Auto

-----

When the projector cannot recognize a connected signal as PC system provided in this projector, the Auto PC Adjustment function operates to adjust the projector and “Auto” is displayed on the SYSTEM Menu icon.

When the image is not provided properly, a manual adjustment is required. (See pages 27–28.)

There is no signal input from the computer. Make sure the connection of a computer and the projector is set correctly. (See “TROUBLESHOOTING” on page 50.)

PC SYSTEM MENU

PC SYSTEM Menu icon

Displays system being selected.

Mode 1	The User preset adjustment in MANUAL PC
	ADJUSTMENT. The Adjusted data can be stored in
	the Mode 1–10.
	PC systems provided in this projector. The projector
SVGA 1
	chooses proper system and displays it.

✽Mode 1 and SVGA 1 are examples.

SELECTING COMPUTER SYSTEM MANUALLY

This projector automatically selects PC system among those provided in this projector, however, PC system can be also selected manually.

1	Press the MENU button to display the On-Screen Menu.
	Press the POINT LEFT/RIGHT buttons to move the red frame
	pointer to the PC SYSTEM Menu icon.
2	Press the POINT UP/DOWN buttons to move the red arrow
	pointer to the desired system, and then press SELECT button.

PC SYSTEM MENU

PC SYSTEM Menu icon

Displays system being selected.

Systems in this dialog box can be selected.

Custom Mode (1–10) set in PC

ADJUST Menu. (pp.27–28)

25