Christie Digital Systems 103-008100-01 user manual Color M, Menu, Color Palette, All Del

Page 36

PICTURE IMAGE

COLOR SELECTION MODE (continued)

COLOR M.

Return to the COLOR MANAGEMENT POINTER. (If you press the MENU button on the top control or the remote control, it returns to the COLOR MANAGEMENT POINTER and you will need to reselect and readjust the color.)

 

MENU

 

 

 

 

 

Return to the IMAGE ADJUST Menu. But any settings that

 

have been changed will not be stored. To store the changed

 

settings, be sure to select “LIST” and go to the COLOR

 

MANAGEMENT LIST.

4

In the COLOR MANAGEMENT LIST, the adjusted color data

 

are check marked. You can decide whether or not to apply

the adjusted color data in the list to the projected image (see below).

LIST MODE

Clear the check mark if you do not want to apply the adjusted color data; select the check mark and then press the SELECT button. The check make disappears.

COLOR PALETTE

Return to the COLOR SELECTION mode so that you can readjust the setting for the color in that line. (This option is not available if the check mark is cleared.)

DEL

Select the DEL box if you want to delete the adjusted data. Press the SELECT button and a confirmation box appears and then select [Yes]

ALL DEL

Delete all the data in the list. Press the SELECT button and a confirmation box appears and then select [Yes].

MENU

The same function as stated above.

COLOR M.

The same function as stated above.

Auto picture control

Press the POINT LEFT/RIGHT buttons to select the desired Auto picture control position (Off, L1, or L2).

Off . . . . Auto picture control OFF position.

L1 . . . . . Auto picture control LEVEL 1 position.

L2 . . . . . Auto picture control LEVEL 2 position.

Color temp.

Press either the POINT LEFT/RIGHT buttons to select the desired Color temp. level (XLow, Low, Mid, or High).

COLOR SELECTION MODE

Level and phase

Gamma

adjustment palette.

adjustment palette.

LIST

 

COLOR M.

 

MENU

 

 

 

 

 

LIST MODE

COLOR PALETTE

DEL

ALL DEL

 

MENU

 

COLOR M.

 

 

 

 

 

NOTE:

If you press the COLOR M. button on the remote control, the display returns to the normal projection screen, but any settings that have been changed will not be stored. To store the changed settings, be sure to select “MENU” to return to the IMAGE ADJUST Menu and store the settings.

36

Image 36
Contents Model To the Owner Risk of Electric Shock Do not OpenSafety Instructions Voor de klanten in NederlandAC Power Cord Requirement ComplianceTable of Contents Features and Design Compact DesignPreparation Name of Each Part of ProjectorSETTING-UP Projector Connecting AC Power CordFor the U.S.A. and Canada Preparation Lens Installation Preparation Adjustable Feet Installing Projector in Proper PositionPreparation Moving Projector Connecting Projector Terminals of ProjectorConnecting to Computers Terminals ProjectorConnecting to Video Equipment TerminalsRemote Control Operation Before OperationLaser Pointer Function Remote Control Batteries Installation Before OperationTOP Controls and Indicators Lamp Replace Indicator Ready Indicator Lamp IndicatorPoint Volume + / Buttons Input ButtonHOW to Operate ON-SCREEN Menu ON-SCREEN MenuFlow of ON-SCREEN Menu Operation Before Operation Menu BAR What is PIN code? Basic OperationTurning on / OFF Projector Turning on the ProjectorBasic Operation Turning OFF the Projector Adjusting Screen Zoom AdjustmentFocus Adjustment Lens Shift AdjustmentSound Adjustment Timer FunctionBasic Operation Picture Freeze Function No Show FunctionComputer Input Selecting Input SourceRGB AV Hdcp Input MenuSelecting Computer System Automatic MULTI-SCAN SystemPC System Menu SvgaPC Adjustment Auto PC AdjustmentPC Adjust Menu Auto PC adjComputer Input Manual PC Adjustment Reset Mode freeStore QuitPicture Image Select Image Level SelectImage Select Menu Picture Screen Adjustment Picture Screen SelectScreen Menu Video Input VideoComponent Video Signal Format Selecting Video SystemVideo Input PAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-NCinema Image button Standard CinemaProvides image at the normal video aspect ratio Picture Image Adjustments Image Adjust MenuPointer Mode Picture ImageColor M MenuColor Palette DELWhite balance Red White balance GreenWhite balance Blue SharpnessSetting Setting MenuSetting Menu Language Logo Logo selectCapture Logo PIN code lockPower management CeilingRear AnamorphicRemote control To change the code of the remote controlOn start Lamp controlWireless Mouse mode Projector modeUSB Security Key lockTo Change the PIN Code Lock setting Changing the PIN code lock settingPIN code lock To Change the PIN Code PIN code lockLamp counter Factory default QuitWireless Mouse AppendixLeft Click button Right Click buttonMaintenance AppendixAppendix AIR Filters Care and Cleaning Cleaning Projection LensLamp Replacement Replace Counter on the nextAppendix Lamp Replace Counter Lamp counterTroubleshooting Problem Try these SolutionsRemote control does PC Adjust Menu TreeSystem Image Select ScreenSetting Image AdjustImage Select SoundAppendix Compatible Computer Specifications ResolutionIndicators and Projector Condition RedLamp Ready Replace Technical Specifications Input 1 JacksAppendix Configurations of Terminals Terminal HDB15-PIN Pin ConfigurationTerminal DVI 24-pin Pin Configuration Terminal Mini DIN 8-PIN Pin ConfigurationLens Replacement To the sales and service engineersAppendix Optional Parts Appendix PIN Code Number Memo Logo PIN Code Lock NoDimensions 12.6 91.5 16.8 230.01AA6P1P5252-- KE6KL