Christie Digital Systems 103-008100-01 user manual Technical Specifications, Input 1 Jacks

APPENDIX

TECHNICAL SPECIFICATIONS
Projector Type	Multi-media Projector
Dimensions (W x H x D)	12.6” x 6.6” x 16.8” (319 mm x 168 mm x 429.5 mm)
Net Weight	17.4 lbs (7.9 kg)
LCD Panel System	1.3” TFT Active Matrix type, 3 panels
Panel Resolution	1024 x 768 dots
Number of Pixels	2,359,296 (1024 x 768 x 3 panels)
Color System	PAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N
High Definition TV Signal	480i, 480p, 575i, 575p, 720p, 1035i, and 1080i
Scanning Frequency	H-sync. 15 kHz–100 kHz, V-sync. 48–100 Hz
Motorized Lens Shift	Up and Down
Horizontal Resolution	800 TV lines (HDTV)
Projection Lamp	300 watt type
Input 1 Jacks	DVI Terminal (Digital) HDCP Compatible, HDB 15-pin Terminal (Analog)
	and Stereo Mini Type Jack (Audio)
Input 2 Jacks	BNC Type x 5 (G or VIDEO/Y, B or Cb/Pb, R or Cr/Pr, H/V, and V),
	Stereo Mini Type Jack (Audio)
Input 3 Jacks	RCA Type x 3 (VIDEO/Y, Cb/Pb and Cr/Pr), RCA Type x 2 (Audio R and L)
	and DIN 4-pin (S-Video)
Other Jacks	DIN 8-pin (Control port), USB port (Series B receptacle), and Wired Remote Jack
Built-in Speakers	INT. SP. Stereo (R and L), 3 watt RMS (T.H.D. 10%)
Feet Adjustment	0˚ to 10.5˚
Voltage and Power	AC 100–120 V (5.7 A Max. Ampere), 50/60 Hz (The U.S.A and Canada)
Consumption	AC 200–240 V (2.7 A Max. Ampere), 50/60 Hz (Continental Europe)
Operating Temperature	41˚F–95˚F (5˚C–35˚C)
Storage Temperature	14˚F–140˚F (-10˚C–60˚C)
Remote Control Transmitter	Power Source	:	AA or LR6 ALKALINE Type x 2
	Operating Range	:	16.4’ (5 m)/± 30˚
	Dimensions	:	2.0” x 1.4” x 7.6” (50 mm x 36 mm x 193 mm)
	Net Weight	:	0.35 lbs (160 g) (including batteries)
	Laser Pointer	:	Class II Laser (Max. Output: 1mW/Wave length: 650±20nm)
Accessories	Owner’s Manual (CD-ROM)
	Quick Reference Guide
	AC Power Cord
	Wireless/Wired Remote Control Transmitter and Batteries
	VGA Cable
	USB Cable
	Control Cable for Serial Port
	Lens Attachment
	Lens Replacement And Installation Manual
	PIN Code Label

●Specifications are subject to change without notice.

●LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are effective, a tiny fraction of the pixels (0.01% or less) may be ineffective by the characteristics of the LCD panels.

●Each projector has its own characteristics.

When projecting with several projectors on the same screen or side by side, you may recognize different white balance and color uniformity on each projector.

57