BOXLIGHT MP-93i specifications Installation, Example of the projector and screen installation

Page 11

Installation

Example of the projector and screen installation

Determine picture size and projection distance as illustrated below.

View from the top

View from the side

Screen

Lens center

a

ENGLISH

	Screen (inch)	a (inch)

		Minimum	Maximum
		Minimum	Maximum

	40	64	84

	60	97	127

	80	130	169

	100	163	213

	120	196	256

	150	244	319

	200	326
	200	326

a:Distance from the projector to the screen. (tolerance : ±10%)

This screen size is full-screen size.(1024 dots X 768 dots)

Installation of liquid crystal projector

Please basically use liquid crystal projector at the horizontal position.

If you use liquid crystal projector by the lens up position, the lens down position and the side up position, this may cause the heat inside to build up and become the cause of damage.

Be especially careful not to install it with ventilation holes blocked.

How to use foot adjusters

Adjust the projection position using the foot adjusters at the bottom of the projector.

View from the front

View from the side

Foot adjuster

Vertical adjustments can be made in the range of 0 to 9°.

Horizontal inclination may be adjusted using the adjuster at the rear.

1.Lift up the projector and press the button of the adjuster to release the lock.

2.Adjust the projection angle, release the button of the adjuster and securely lock it.

3.To adjust the angle slightly, revolve the foot adjusters.

		• Do not unlock the foot adjusters while you do not support the projector, to avoid falling of
	Caution
		the projector and causing an injury.

•Do not revolve the foot adjusters by force, the foot adjusters is damaged.

•Securely lock the adjuster.

•Do not apply unnecessary force from the upper side when lifting the projector. Otherwise, projector may be damaged or a finger could be caught and cause injury.

11

Image 11

Contents Operating Guide FeaturesContents OutlineFor the Customers in U.K Instructions to Users Video signal cablesPower cord Before useIf any abnormality occurs Do not look directly at the lens when Lamp is litDo not install this unit in an unstable place Do not use power supplies other Than that specifiedDo not step on this unit or do not put a Heavy object on it Be careful in handling the power cordCleaning Handle the power cord carefullyVolume When you are not going to use For a long timeClean inside the unit at least once two years Do not place this unit where it gets hotNames and functions of each part Contents of shipping boxRGB input terminal Remote control sensor Main Power switchAC in socket Video input terminalRemote control transmitter Remove the battery compartment cover How to insert batteriesHow to use foot adjusters InstallationExample of the projector and screen installation To project the picture Basic operationsPLUG&PLAY To turn off the powerIndicator lights up orange Standby modeMagnifying Function Freeze FunctionOn-screen menus are displayed on the screen Adjustments and functionsTo return to the initial setting Memory functionManual Operation SET UPHow to use the SET UP menu Adjustment Item Details of adjustment Freeze MagnifyAdjustment Item Details of adjustment AUTO-adjustmentAUTO-adjustment Confirm Screen During AUTO-adjustmentMenu OPT. allows you to control communication function etc ImageOPT Menu Image serves of the picture inversionConnection to the RGB signal terminal Connection to the video signal terminalsResolution Standard Display Dots KHz Type Example of computer signalComputer/signal Vertical Timing lines Initial set signalsComputer/signal Horizontal Timing µs +5V Control signal terminalPin No RS-232C Mouse PS/2 SerialSerial mouse PS/2 mouseADB Mac mouse RS232C cable Reference Control command tableControl command table CommunicationControl data table Example of command error Procedure of getting the Projector statusProcedure of setting the Projector status Procedure of default setting the Projector statusComputerDesk type Example of system setupConnecting various equipment AC Inlet Computer Note typeDo not use with removed air filter Cleaning the air filterAir filter Filter cover Loosen two screws and pull the handle to remove Lamp How to replace lampRemove the lamp cover Message table Install the lamp cover and fix it using screwsReset the lamp time LampBlink in the following cases Indicator displayRCA Jack terminal Terminal Dimension diagramAll dimensions shown in inches RCA Jack terminal Input terminal Input/Output