COMPUTER MODE
17.Another dialog box "PC ADJUSTMENT DISPLAY 2" will appear and the parameter data for the Mode you have selected is shown in this dialog box.
18.Move the arrow to an item that you want to adjust by pressing the POINT UP/DOWN BUTTON(s).
19.To increase the level, point the arrow to ▲ and then press the SELECT (REAR CLICK) BUTTON. To decrease the level, point the arrow to ▼ and then press the SELECT (REAR CLICK) BUTTON.
20.If you want to store the settings in the memory, move the arrow to Stored and press the SELECT (REAR CLICK) BUTTON. When you have stored the settings, "OK ?" is displayed for confirmation. Move the arrow to Yes and then press the SELECT (REAR CLICK) BUTTON.
21.To recall the parameter data before setting, move the arrow to Reset and then press the SELECT (REAR CLICK) BUTTON. When you have reset the settings, "OK ?" is displayed for confirmation. Move the arrow to Yes and then press the SELECT (REAR CLICK) BUTTON. You can adjust the settings again if needed.
22.To quit the MENU, move the arrow to Quit and then press the SELECT (REAR CLICK) BUTTON.
23.If you quit the MENU without storing the settings in the memory, the parameter data you changed will not be kept.
24.The stored settings are memorized even if the MAIN ON/OFF is switched off.
MAIN MENU DISPLAY
XGA 1
PC ADJUSTMENT
DISPLAY 2
Adjust the display area, move the arrow by pressing the POINT UP/DOWN BUTTON(s) to select ( 
) and press the
SELECT (REAR CLICK) BUTTON. Another dialog box "DISPLAY AREA DISPLAY" will appear.
Move the arrow to an item that you want to select display area by pressing the POINT UP/DOWN BUTTON(s) and press the SELECT (REAR CLICK) BUTTON.
Selected mode data will be displayed in H, V box.
To close dialog, move the arrow to "Quit" and press the SELECT (REAR
CLICK) BUTTON.
ITEM | FUNCTION |
|
|
CLAMP | Adjustment of the clamp level. When the image has a dark bar, try this adjustment. |
|
|
DISPLAY AREA | Adjustment the display area to match your PC. |
|
|
HORIZ. SCALE | Expanding or compressing level for the horizontal direction. |
VERT. SCALE | Expanding or compressing level for the vertical direction. |
|
|
47