BOXLIGHT FP-95t manual SETTING-UP the Projector, Positioning, Room Light, Adjustable Feet

INSTALLATION

SETTING-UP THE PROJECTOR

POSITIONING:

●This projector is basically designed to project on a flat projection surface.

●This projector can be focused from 4.9' (1.5 m) ~ 80.7' (24.6 m).

●Refer to the figure below as an example when positioning the projector to the screen.

THIS PROJECTOR SHOULD BE SET IN THE WAY INDICATED. NEVER HANG

THE PROJECTOR, OR FALL DOWN ON ITS SIDE. IT MAY RESULT IN FIRE

HAZARD.

ROOM LIGHT							Maximum Zoom		600"
						Minimum Zoom
The projector should be placed in a room with
						400"
limited light. Picture quality will be directly
						300"
affected by lightning conditions.			150"		200"				462"
100"
								308"
40"		115"		154"		231"
	77"

DISTANCE

Screen	Max. Zoom	40"	100"	150"	200"	300"	400"	600"
Size	Min. Zoom		77"	115"	154"	231"	308"	462"
Distance		4.9' (1.5 m)	13.1' (4.0 m)	20' (6.1 m)	26.9' (8.2 m)	40' (12.2 m)	53.8' (16.4 m)	80.7' (24.6 m)

ADJUSTABLE FEET

Picture tilt and projection angle can be adjusted by twisting ADJUSTABLE FEET. Projection angle can be adjusted up to 4 degrees by rotating Adjustable Feet.

DOWN

UP DOWN

UP

ADJUSTABLE FEET

MOVE THE PROJECTED IMAGE POSITION

Adjust the projected image position (maximum 760mm downward or upward on the 100" screen) by using lens shift function. (See page 33.)

760 mm

100"

SCREEN

760 mm

7