BOXLIGHT FP-95t manual Service

APPENDIX

Problem:	Try these Solutions:
Picture is T/B inverted.	Check Reverse T/B feature.
	(See "OTHER FUNCTION SETTING" section on pages 50 ~ 51).
Picture is L/R Reversed.	Check Reverse L/R feature.
	(See "OTHER FUNCTION SETTING" section on pages 50 ~ 51).
Some displays are not seen	Check Display feature.
during the operation.	(See "OTHER FUNCTION SETTING" section on pages 50 ~ 51).
No sound.	● Check audio cable connection from audio input source.
	● Adjust audio source.
	● Press the VOLUME (+) button.
	● Press the MUTE button.
Remote control unit doesn't	● Check the batteries.
work.	● Make sure nothing is blocking between the remote control sensor and remote
	control unit.
	● Make sure you are not too far from the projector when using the remote control
	unit. {Maximum operate range 16.4 ' (5 m)}.
	● Check the transmitted signal mode from the remote control unit.
	(See "OTHER FUNCTION SETTING" section on pages 50 ~ 51).
Wireless mouse function	● Check the cable connection between the projector and the computer.
does not work.
	● Check the mouse setting on your computer.
	● Turn on the projector before you turn on the computer.

SERVICE

WARNING: High voltages are used to operate this projector. Do not attempt to open the cabinet.

You can often correct operating problems yourself. If the projector fails to work properly, see "TROUBLESHOOTING" section on pages 55-56. To correct the failure, try the "Solutions".

Boxlight Service is easily obtained. If after following all operating instructions, you find that service is necessary, contact Boxlight for assistance at 1-800-762-5757.

56