USER GUIDE | LCD PROJECTOR |
6.4MAKING THE CABLE CONNECTIONS
1.Place the projector on a stable, hard surface, at the desired distance from the projection screen.
2.Connect the source equipment to the connector ports of the LCD projector, preferentially into the Source 1 connector port (This is the default source connector port):
- PC: Insert the end of the VGA cable marked ‘LCD’into Source 1 connector port or the next available source port. Connect the connector marked ‘Monitor’onto your monitor cable, and the connector marked ‘VGA’, into the VGA port on the PC unit. If you do not intend to use a monitor then just leave the short cable section unconnected.
16