Ask Proxima Impression 860 manual FCC Statement

Page 44

USER GUIDE

LCD PROJECTOR

14 FCC STATEMENT

This equipment has been certified to comply with the limits for a Class A computing device, pursuant to Subpart J of Part 15 of FCC rules. Only peripherals (computer input/output devices, terminals, printers, etc.) certified to comply with the Class A limits may be attached to a computer that complies with Class A limits. When connecting to a peripheral device, a shielded input/output cable is required to ensure compliance with FCC rules. The shielded cable that must be used is supplied with the equipment. Operation with non-certified peripherals or non-shielded cables is likely to result in interference to radio and TV reception.

This equipment generates and uses radio-frequency energy and, if not installed and used in accordance with the instruction manual, may cause interference to radio and television reception. It has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications in Subpart J of Part 15 of the FCC rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures :

Reorient the receiving antenna.

Relocate the projector with respect to the receiver.

Plug the equipment to a different outlet so that equipment and receiver are on different branch circuits.

Fasten cables using mounting screws to ensure adequate EMI control.

You may require the following booklet from the Federal Communications Commission (FCC) : "How to identify and resolve radio and TV interference problems", available from the U.S. Government Printing Office, Washington, DC 20402, Stock No. 004-000-00345-4.

43

Image 44
Contents Impression Impression User Guide LCD Projector Table of Contents Environmental Statement FCC Statement Service Information HOT Symbol DescriptionsSafety Instructions User Guide LCD Projector User Guide LCD Projector User Guide LCD Projector Introduction Main Features Optional Material When YOU Open the LCD Projector PackageSupplied Material Glossary Setting UP the LCD Projector Safety PrecautionsArrangements in the Projection Room Selecting Additional Adapters and Cables Making the Cable Connections User Guide LCD Projector On OFF Image Adjustments LensScale FreqTune Bright PositionContr Using the LCD Projector Infrared Remote ControlSource KEY Function KEY Type MEMON/OFF Rear FreezeBlank PAN OSDCursors RightTOP Panel Keyboard Special Features of Your LCD Projector Intelligent Cooling SystemSET-UP Memory OSD SystemReset Power Save FeatureTROUBLE-SHOOTING Symptom SolutionSymptom Solution General MaintenanceLamp Replacement Info Lamp Replacement MessagesPlease Change Lamp Immediately Lamp timer has not been changed Fuse Replacement Care of the Remote Control Technical Data General Environmental LimitsPower Supply LCD Projector UnitCompatibility Remote ControlMode Resolution Maximum Vertical Hddsub Connectors on the Supplied CablesCable Projector Source END Connectors Source 1/2/3Mouse Environmental Statement FCC Statement Service Information ASK LCD Inc North and South American Office