USER GUIDE | LCD PROJECTOR |
8.4RESET
This feature enables standard settings of most controls. RESET will only reset the active mode.
A fundamental master reset may be performed by pressing all four top panel keys simultaneously. All settings will return to factory defaults, so do not perform a master reset unless it is really required. This operation will also erase all custom sources and modes that have been memorized.
8.5POWER SAVE FEATURE
If ON/OFF is pressed on the remote control, the screen goes blank, and after five minutes if there is no futher action the LCD projector lamp will also switch off. Full power on is returned by pressing ON/OFF again on the remote control.
28