USER GUIDE | LCD PROJECTOR |
If the lamp timer is accidentally reset before the lamp has reached expected lifetime, or the lamp is changed before it is required and reset the timer, the warning below appears. This leaves you with two alternatives which are both described in the next paragraphs.
WARNING!
The lamp change indicator has been activated,
though the lamp has not reached expected lifetime.
Press RESET to confirm lamp change,
or press any other key to continue...
If the lamp has been changed on purpose before required, this message appears when you confirm by pressing RESET.
INFO!
The lamp timer has been reset to 0
If the lamp timer was reset unintentionally, this message confirms that mistake has been corrected by pressing any other key to continue.
INFO!
The lamp timer has not been changed
33