USER GUIDE | LCD PROJECTOR |
10 MAINTENANCE
10.1GENERAL
From time to time, the LCD projector unit and lens may be cleaned with a damp,
Do not scratch the lens surface and use the lens cap for added protection when the projector is not in use. Remember to remove the
10.2LAMP REPLACEMENT
The projector is using a 575W metal halide lamp for illumination. The recommended lamp type is Osram HMI 575 W/GS Dual Ended. This lamp is HIGH PRESSURE when operating. The lamp may not be changed by the user for safety reasons and under the terms of the warranty. Always refer to authorized dealers if the LCD projector transmits a lamp replacement message.
There are no user servicable parts inside the projector. Never touch any glass parts (lamp bulb or lenses), as the fingerprints will burn and affect the optical quality of the projected image.
Also, fingerprints on the lamp bulb may cause damage and possibly explosion of the lamp when in operation. If any parts of the lamp or optics have been touched, it must be cleaned using a cloth moistened with alcohol (included with replacement bulb) and polished with a dry cloth.
31