USER GUIDE | LCD PROJECTOR |
| |
|
|
| |
| SYMPTOM | SOLUTION | |
| Some colors are | ∙ Check first that there are no loose cable | |
| unstable or | connections. | |
| flickering | ∙ You can try to adjust the image quality with the | |
|
| CONTRAST and BRIGHTNESS keys. | |
|
| ∙ Try to improve the tuning using the TUNE key. | |
| The whole | ∙ Press SCALE to return to the default mode. | |
| image appears | ∙ Adjust the frequency and tuning settings | |
| to be unstable | (instability), or the image position settings | |
| or misplaced | (misalignment). | |
|
| ∙ Check that you are using a source with | |
|
| compatible resolution. | |
|
| ∙ The LCD projector may be connected to a source | |
|
| with a | |
|
| Adjust the frequency and position of the image. | |
| Cooling fan is | ∙ Check that the Power ON/OFF switch is ON. | |
| not working | ∙ If the fan does not work the LCD projector must | |
|
| not be used and should be returned to your | |
|
| dealer for repair. | |
| The remote | ∙ Is the mouse cable connected? | |
| control mouse is | ∙ You must boot the computer after the cable has | |
| not working | been connected for it to recognise the mouse. If | |
|
| you are unsure whether this was the case, reboot | |
|
| your computer. | |
|
| ∙ Make sure you point the remote control at the | |
|
| projection screen or directly at the IR receiver | |
|
| ∙ The maximum range of the IR transmitters is 7 | |
|
| m/ 23 feet - Are you standing close enough? | |
|
| ∙ If the effective range of the transmitters is | |
|
| significantly reduced, the remote control needs | |
|
| new batteries. | |
| The desktop | ∙ Remember that the mouse must be connected | |
| mouse is not | before the computer source is switched on. | |
| working | ∙ Are the mouse cable and mouse adapter | |
|
| connections secure? | |
|
| ∙ Check the mouse driver settings on the computer | |
|
| source. | |
30