BenQ cp270 user manual Description of each menu

Description of each menu

1. DISPLAY menu

2. PICTURE menu

FUNCTION	DESCRIPTION (default setting/value)
(default setting/
value)
Wall Color	Corrects the projected picture’s color when the projection surface is
(Off)	not white. See "Using Wall Color" on page 31 for details.
Aspect Ratio	There are four options to set the image's aspect ratio depending on
(Auto)	your input signal source. See "Selecting the aspect ratio" on page 29 for
	details.
Keystone	Corrects any keystoning of the image. See "Correcting keystone" on

(0)page 28 for details.

Position	Displays the position adjustment page. To move the projected image,
	use the directional arrow keys. The values shown on the lower position

(0)of the page change with every key press you made until they reach their maximum or minimum.

Phase	Adjusts the clock phase to reduce image
	distortion.
(depends on the
selected input
signal)
H. Size	Adjusts the horizontal width of the image.
(0)
Digital Zoom	Magnifies or reduces the projected image. See "Magnifying and
(1.0X)	searching for details" on page 28 for details.
Picture Mode
(PC source:	Pre-defined picture modes are provided so you can optimize your
Dynamic;	projector image set-up to suit your program type. See "Selecting a
Video source:	picture mode" on page 30 for details.
Standard)
Reference	Selects a picture mode that most suits your need for the image quality
Mode	and further fine-tune the image based on the selections listed on the
	same page below. See "Setting the User 1/User 2 mode" on page 31 for
(Dynamic)	details.
Brightness	Adjusts the brightness of the image. See "Adjusting Brightness" on

(50)page 31 for details.

Contrast Adjusts the degree of difference between dark and light in the image.

(0)See "Adjusting Contrast" on page 31 for details.

Color Adjusts the color saturation level -- the amount of each color in a

(0)video image. See "Adjusting Color" on page 32 for details.

Operation 41