BenQ W10000/W9000 Obtaining a preferred projected image size, Installation for a 169 ratio screen

Page 15

W10000-en.book Page 15 Thursday, October 19, 2006 1:45 PM

Obtaining a preferred projected image size

The distance from the projector lens to the screen, the zoom setting, and the video format each factors in the projected image size. BenQ has provided separate tables of dimensions for both 16:9 and 4:3 screen ratios to assist you in determining the ideal location for your projector.

1.Determine the aspect ratio of your screen, (16:9 or 4:3)?

2.Select the Screen Size you desire from the 16:9 ratio screen dimension table or 4:3 ratio screen dimension table below, according to which screen aspect you have. Install the projector at a distance from the screen corresponding to between the Min. and Max. Projection Distance values in the table.

3.Decide the exact height of your projector.

Installation for a 16:9 ratio screen

English

Ceiling Installation

Ceiling

 

 

 

Diagonal

 

Projection Distance

 

 

 

Height

 

Center of the lens

 

 

 

 

 

 

Screen

Floor Installation

Diagonal

Screen

Center of the lens

Height

 

Projection Distance

Floor

16:9 (widescreen) ratio screen dimension table

Screen Dimensions (inch / cm)

Projection Distance (inch / cm)

Diagonal

Width

Height

Min distance (with

Max distance (with min

max zoom)

zoom)

 

 

 

 

 

 

 

 

50 / 127

44 / 111

25 / 62

78 / 199

106 / 270

60 / 152

52 / 133

29 / 75

94 / 239

128 / 324

70 / 178

61 / 155

34 / 87

110 / 279

149 / 379

80 / 203

70 / 177

39 / 100

126 / 319

171 / 433

90 / 229

78 / 199

44 / 112

141 / 359

192 / 487

100 / 254

87 / 221

49 / 125

156 / 400

213 / 541

110 / 279

96 / 244

54 / 137

172 / 438

234 / 595

120 / 305

105 / 266

59 / 149

188 / 478

256 / 649

130 / 325

113 / 288

64 / 162

204 / 518

277 / 703

140 / 356

122 / 310

69 / 174

220 / 558

298 / 757

150 / 381

131 / 332

74 / 187

235 / 598

319 / 811

160 / 406

139 / 354

78 / 199

251 / 638

341 / 865

170 / 432

148 / 376

83 / 212

267 / 677

362 / 919

180 / 457

157 / 398

88 / 224

282 / 717

383 / 973

190 / 483

166 / 421

93 / 237

298 / 757

405 / 1028

200 / 508

174 / 443

98 / 249

314 / 797

426 / 1082

250 / 635

218 / 553

123 / 311

392 / 996

532 / 1352

300 / 762

261 / 664

147 / 374

471 / 1195

639 / 1622

The above numbers are approximate and may be slightly different from the actual measurements. Only the recommended screen sizes are listed. If the your screen size is not in the table above, please contact your BenQ dealer for assistance.

An examination of the table reveals that you can place the projector lens in the range from 2 to 16.22m distance from the screen, which will give you a projected image from 50" (1.11 x 0.62m) to 300" (6.64 x 3.74m) full screen.

Positioning your projector

15

Image 15
Contents W10000/W9000 Digital Projector Home Cinema Series WelcomeWarranty CopyrightDisclaimer Table of contents Indicators Fine-tuning the image size and clarityUsing the menus Picture menu Display menu Setup menu Advance menuSafety, regulatory and legal information Safety instructions Safety instructionsDuring operation. It may harm your sight Areas where the mains power supplyLamp assembly for replacement Do not block the ventilation holes whilstW10000-en.book Page 8 Thursday, October 19, 2006 145 PM Shipping contents Remote control batteriesOverview Full HD compatibile BenQ W10000/W9000 projector featuresRear view Connector panelProjector exterior view Front and upper side viewControl panel Controls and functionsRemote control Floor rear Positioning your projectorChoosing a location Floor frontDiagonal Width Height Min distance with Installation for a 169 ratio screenWidescreen ratio screen dimension table Obtaining a preferred projected image sizeInstallation for a 43 ratio screen Standard ratio screen dimension tableShifting the projection lens vertically Connecting with video equipment Connecting a computerConnect the projector to a computer with a VGA-BNC cable Connecting S-video or video devices Connecting video inputsConnecting Hdmi devices Connecting component-video devicesTurning the projector on Using the projectorAdjusting the projected image PreparationsSelecting the aspect ratio Fine-tuning the image size and claritySelecting a preset mode Optimizing the imageWith letterbox format to Adjusting contrast ratioOther adjustments Displaying more than one image source simultaneouslyPOP Turning the power off Personalizing the projector menu displaySaving and loading the video memory On Screen Display OSD structure MenusW10000-en.book Page 25 Thursday, October 19, 2006 145 PM Using the menusPicture menu Extended Picture SettingsOptions menu Display menuDust Filter Setup menuAdvance menu LampIv. Repeat steps ii and iii for other color adjustments To adjust and store the settingsCare of the projector Additional informationOutwards and away from the projector To clean the filterFilter timer. See page 28 for details Remove the filter cover by gently liftingBoth sides. Loosen the screws Installing the cable connector-panel coverTo install the cover Section. See page 31 for detailsTighten the screws securing the lamp box Replacing the lampIndicators When the projector is in a normal stateWhen the projector is in an abnormal state Picture is blurred TroubleshootingProjector does Image is unstableDimensions Specifications