W10000-en.book Page 8 Thursday, October 19, 2006 1:45 PM
Safety instructions (continued)
English
12.Never attempt to replace the lamp assembly 15. until the projector has cooled down and is unplugged from the power supply.
13.When you think service or repair is required, take the projector only to a suitably qualified technician.
14.Do not attempt to disassemble this projector. There are dangerous high voltages inside which may cause death if you should come into contact with live parts. The only user serviceable parts are the lamp and air filters which have their own removable covers or access panels. See page 33.
Under no circumstances should you ever undo or remove any other covers. Refer servicing only to suitably qualified professional service personnel.
Do not store the projector on end vertically. Doing so may cause the projector to fall over, causing injury or resulting in damage.
8 | Safety, regulatory and legal information |