BenQ W10000/W9000 user manual Optimizing the image, Fine-tuning the image size and clarity

Page 20

W10000-en.book Page 20 Thursday, October 19, 2006 1:45 PM

English

Fine-tuning the image size and clarity

1. Adjust the projected image to the size that you need

2. Then sharpen the image by using the focus buttons.

using the zoom buttons. When the ZOOM button is

When the FOCUS button is pressed, an adjustment bar

pressed, an adjustment bar " e

 

f "

" e

 

 

f " displays on the screen. To further

Zoom

Focus

displays on the screen.

 

 

adjust the image

clarity, press the e or f button on the

To enlarge the image size, press the c button on the

projector or remote control.

 

 

 

 

 

 

 

projector or the f button on the remote control.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To reduce the image size, press the d button on the

 

 

 

 

 

 

 

projector or the e button on the remote control.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Optimizing the image

To optimize the image, use the remote control or on-screen menus. For the operation of on-screen menus, please refer to page 25.

The following steps are optional. You do not need to follow every step. It depends on the image quality you desire.

1. Selecting a preset mode

Select a preset mode on the remote control, or in Picture > Preset Mode menu. There are 5 modes available for each input. These modes consist of preset values suitable for various projection situations as described below:

Preset Cinema Mode: with well-balanced color saturation and contrast with a low brightness level. This is most suitable for enjoying movies in a totally dark environment (as you would find in a commercial cinema).

Preset Home Theater Mode: is slightly brighter than Cinema Mode, and suitable for use in rooms where there is a small amount of ambient light.

Preset Family Room Mode: Brightness is emphasized in this mode and is best suited for use in rooms with normal lighting levels. It is good for watching TV programs, playing games or seeing bright movies.

Preset Photo Mode: designed for viewing digital pictures in a living room.

Preset Gaming Mode: is suitable for playing video games in a bright living room.

2. Selecting the aspect ratio

23

1

ENTER

C T

C T

SIZE

The "aspect ratio" is the ratio of the image width to the image height. Digital TV is usually in 16:9 ratio, which is the default for this projector, and most analog TV signals and DVDs are in 4:3 ratio.

With the advent of digital signal processing, digital display devices like this projector can dynamically stretch and scale the image output to a different aspect than that of the image input source. Images can be stretched in a linear manner so the whole of the image is stretched equally, or non-linearly, which distorts the image.

20 Using the projector

Image 20
Contents Welcome W10000/W9000 Digital Projector Home Cinema SeriesDisclaimer WarrantyCopyright Table of contents Fine-tuning the image size and clarity Using the menus Picture menu Display menuSetup menu Advance menu IndicatorsSafety, regulatory and legal information Safety instructions Safety instructionsAreas where the mains power supply Lamp assembly for replacementDo not block the ventilation holes whilst During operation. It may harm your sightW10000-en.book Page 8 Thursday, October 19, 2006 145 PM Overview Shipping contentsRemote control batteries BenQ W10000/W9000 projector features Full HD compatibileConnector panel Projector exterior viewFront and upper side view Rear viewControls and functions Control panelRemote control Positioning your projector Choosing a locationFloor front Floor rearInstallation for a 169 ratio screen Widescreen ratio screen dimension tableObtaining a preferred projected image size Diagonal Width Height Min distance withShifting the projection lens vertically Installation for a 43 ratio screenStandard ratio screen dimension table Connect the projector to a computer with a VGA-BNC cable Connecting with video equipmentConnecting a computer Connecting video inputs Connecting Hdmi devicesConnecting component-video devices Connecting S-video or video devicesUsing the projector Adjusting the projected imagePreparations Turning the projector onFine-tuning the image size and clarity Selecting a preset modeOptimizing the image Selecting the aspect ratioAdjusting contrast ratio With letterbox format toPOP Other adjustmentsDisplaying more than one image source simultaneously Saving and loading the video memory Turning the power offPersonalizing the projector menu display Menus On Screen Display OSD structureUsing the menus W10000-en.book Page 25 Thursday, October 19, 2006 145 PMExtended Picture Settings Picture menuDisplay menu Options menuSetup menu Advance menuLamp Dust FilterTo adjust and store the settings Iv. Repeat steps ii and iii for other color adjustmentsAdditional information Care of the projectorTo clean the filter Filter timer. See page 28 for detailsRemove the filter cover by gently lifting Outwards and away from the projectorInstalling the cable connector-panel cover To install the coverSection. See page 31 for details Both sides. Loosen the screwsReplacing the lamp Tighten the screws securing the lamp boxWhen the projector is in an abnormal state IndicatorsWhen the projector is in a normal state Troubleshooting Projector doesImage is unstable Picture is blurredSpecifications Dimensions