BenQ MS524/MS514H/MX525/MW526/TW526 user manual Description of each menu

Page 39

Description of each menu

1. DISPLAY menu

	Function	Description
	Wall Color	Corrects the projected picture’s color when the projection surface is
	Wall Color	not white. See "Using Wall Color" on page 27 for details.
		not white. See "Using Wall Color" on page 27 for details.
	Aspect Ratio	There are several options to set the image's aspect ratio depending on
	Aspect Ratio	your input signal source. See "Selecting the aspect ratio" on page 25
		for details.
	Keystone	Corrects any keystoning of the image. See "Correcting keystone" on
	Keystone	page 20 for details.
		page 20 for details.
		Displays the position adjustment page. To move the projected image,
		use the directional arrow keys. The values shown on the lower
	Position	position of the page change with every key press you made until they
	Position	reach their maximum or minimum.
		reach their maximum or minimum.
		This function is only available when a PC signal (analog RGB) is selected.

		Adjusts the clock phase to reduce image
		distortion.
	Phase

This function is only available when a PC signal (analog RGB) is selected.

	H. Size	Adjusts the horizontal width of the image.
	H. Size	This function is only available when a PC signal (analog RGB) is selected.


	Digital Zoom	Magnifies or reduces the projected image. See "Magnifying and
	Digital Zoom	searching for details" on page 25 for details.
		searching for details" on page 25 for details.

Operation 39

Image 39

Contents MS524/MS514H/MX525/MW526 TW526 Digital Projector Table of contents Safety Instructions Important safety instructionsSafety Instructions 3000 m Feet Ceiling mounting the projector Introduction Projector featuresShipping contents Front/upper side Rear/lower side Projector exterior viewControls and functions Remote control Replacing the remote control batteries Remote control effective rangeFront Ceiling Positioning your projectorChoosing a location Front TableProjection dimensions Obtaining a preferred projected image sizeMS524/MS514H/MX525 MW526/TW526 Screen size Projection distance mm DiagonalAverage Connection ConnectionBest Connecting video source devicesConnecting audio Terminal name Terminal appearanceStarting up the projector OperationFine-tuning the image size and clarity Adjusting the projected imageAdjusting the projection angle Auto-adjusting the imageCorrecting keystone Below is the overview of the OSD menu Using the menusIf you forget the password Using a security cable lockUtilizing the password function Setting a passwordEntering the password recall procedure Changing the passwordDisabling the password function Changing Color Space Switching input signalSelecting the aspect ratio Magnifying and searching for detailsMS524/ MW526/ MS514H/ TW526 MX525 About the aspect ratioGo to the Picture Picture Mode menu Using Wall ColorSelecting a picture mode Setting the User 1/User 2 modeFine-tuning the image quality in user modes Adjusting Brilliant ColorSelecting a Color Temperature 3D Color Management Setting a preferred color temperatureSetting the presentation timer Resetting current or all picture modesSelection Description Top-Left Bottom-Left Top-Right Bottom-Right To cancel the timer, perform the following stepsRemote paging operations Freezing the imageOperating in a high altitude environment To activate the High Altitude ModeHiding the image Locking control keysTurning off the Power On/Off Ring Tone Adjusting the soundUsing the test pattern Adjusting the sound levelTo select Blackboard or Whiteboard Using the teaching templatesShutting down the projector Direct power offMenu operation Menu systemMain menu Sub-menu Options Basic Advanced Description of each menu Save 3D Settings Apply 3D SettingsTeaching Template Description Fine Tuning 3D Color Picture menu Source menu Function Description Picture ModeTemperature Color TemperatureSettings System Setup Basic menu Function Description PresentationTimer InstallationScreen LockBackground Color SplashCaption System Setup Advanced menu Function DescriptionReset All ClosedCurrent SystemStatus Care of the projector MaintenanceLamp information Getting to know the lamp hourExtending lamp life Status Message Timing of replacing the lampReplacing the lamp Resetting the lamp timerThermal events IndicatorsLight Status & Description Power events Lamp eventsTroubleshooting Projector specifications SpecificationsCeiling mount installation DimensionsTiming chart Supported timing for PC inputKHz MAC21 Supported timing for Hdmi Hdcp inputSupported timing for Component-YPbPrinput TimingMHz Ntsc Supported timing for Video and S-Video inputsDisclaimer Warranty and Copyright informationLimited warranty Copyright