BenQ MS524/MS514H/MX525/MW526/TW526 System Setup Basic menu Function Description Presentation

4. SYSTEM SETUP: Basic menu

Function	Description
Presentation	Reminds the presenter to finish the presentation within a certain time
Timer	frame. See "Setting the presentation timer" on page 30 for details.
Language	Sets the language for the On-Screen Display (OSD) menus. See "Using
	the menus" on page 21 for details.
Projector	The projector can be installed on a ceiling or behind a screen, or with
Installation	one or more mirrors. See "Choosing a location" on page 13 for details.
	Menu Display Time
	Sets the length of time the OSD will remain active after your last key
Menu	press.
	Menu Position
Settings
	Sets the On-Screen Display (OSD) menu position.
	Reminder Message
	Sets the reminder messages on or off.
	Direct Power On
	Allows the projector to turn on automatically once the power is fed
	through the power cord.
	Signal Power On
	Sets whether to turn the projector directly on without pressing
	POWER or ON when the projector is in standby mode and the signal
	is feed through the VGA cable.
	Auto Power Off
	Allows the projector to turn off automatically if no input signal is
	detected after a set period of time. See "Setting Auto Power Off" on
	page 47 for details.
Operation	Quick Cooling
	Enables or disables the Quick Cooling function. Selecting On enables
Settings	the function and projector cooling time will be shortened from a
	normal 90-second duration to approximately 15 seconds.
	This function is only available when Instant Restart is off.
	Instant Restart
	Selecting On enables you to restart the projector immediately within
	90 seconds after turning it off.
	Blank Timer
	Sets the image blank time when the Blank feature is activated, once
	elapsed the image will return to the screen. See "Hiding the image" on
	page 32 for details.
	Sleep Timer
	Sets the auto-shutdown timer.

42 Operation