BenQ SP870 user manual Connecting Video source devices, Best video quality, Better video quality

Page 18

Connecting Video source devices

This section describes how to connect the projector to Video source devices using video cables. Video cable connections are recommended for Video presentations.

You can connect your projector to various Video source devices that provide any one of the following output sockets:

DVI-D

Component Video

S-Video

Video (composite)

You need only connect the projector to a Video source device using just one of the above connecting methods, however each provides a different level of video quality. The method you choose will most likely depend upon the availability of matching terminals on both the projector and the Video source device as described below:

Best video quality

The best available video connection method is DVI-D. If your source device is equipped with a DVI-D socket, you can enjoy digital video quality.

See "Connecting a DVI-D source device" on page 19 for how to connect the projector to a DVI-D source device and other details.

If no DVI-D source is available, the next best video signal is Component Video (not to be confused with composite Video). Digital TV tuners and DVD players output Component Video natively, so if available on your devices, they should be your connection method of choice in preference to S-Video or (composite) Video.

See "Connecting a Component Video source device" on page 20 for how to connect the projector to a Component Video device.

Better video quality

The S-Video method provides a better quality analog video than standard composite Video. If you have both composite Video and S-Video output terminals on your Video source device, you should elect to use the S-Video option.

Least video quality

Composite Video is an analog video and will result in a perfectly acceptable, but less than optimal result from your projector, being the least video quality of the available methods described here.

See "Connecting an S-Video or a composite Video source device" on page 21 for how to connect the projector to an S-Video or Video device.

Connecting Audio

The projector has built-in mono speakers which are designed to provide basic audio functionality accompanying data presentations for business purposes only. They are not designed for, nor intended for stereo audio reproduction use as might be expected in home theater or home cinema applications. Any stereo audio input (if provided), is mixed into a common mono audio output through the projector speakers.

18 Connection

Image 18
Contents Welcome SP870 Digital ProjectorTable of contents Cigarette smoke may contaminate optical Important safety instructionsWith all windows rolled up 3000 m 10000 feetImportant safety instructions Ceiling mounting the projector Projector features IntroductionShipping contents See Connection on page 16 for connection details Projector exterior viewRear/lower side Quick-release foot Projection lens Lens capControls and functions ProjectorYour own timer setting. See Setting Remote controlStarts the FAQ function. See Utilizing FAQ DetailsOperating the Laser pointer Remote control effective rangeMaking the remote control a wired control 22. D. Zoom +Positioning your projector Choosing a locationObtaining a preferred projected image size Select your screen size Projection dimensions ZoomConnection Connecting a computer or monitorConnecting a computer To connect the projector to a notebook or desktop computerTo connect the projector to a monitor Connecting a monitorComputer using the D-SUB/COMP. Socket, not the DVI-Dsocket With a VGA cable With a VGA to DVI-A cableBest video quality Connecting Video source devicesConnecting Audio Better video qualityConnecting a DVI-D source device To connect the projector to a DVI-D source deviceWith a Component Video cable Connecting a Component Video source deviceTo connect the projector to a Component Video source device With a Component Video to VGA D-Sub adaptor cableConnecting an S-Video or a composite Video source device To connect the projector to an S-Video/Video source deviceOperation Starting up the projectorUse / to highlight the System Setup Basic menu Using the On-Screen Display OSD menusUsing a security cable lock Securing the projectorIf you forget the password Utilizing the password functionSetting a password To leave the OSD menu, press MENU/EXITEntering the password recall procedure Changing the passwordDisabling the password function Switching input signal Changing Color SpaceAuto-adjusting the image Adjusting the projected imageAdjusting the projection angle Fine-tuning the image size and clarityMagnifying and searching for details Correcting keystonePress Selecting the aspect ratio About the aspect ratioPC input signals D-Sub/Comp. analog RGB, and DVI-D DVI-D Using Wall ColorSelecting a picture mode Optimizing the imageFine-tuning the image quality in user modes About color temperatures Adjusting Brilliant ColorSelecting a color temperature 3D Color ManagementPress MENU/EXIT to exit and save the settings Setting the presentation timerRepeat steps 3 to 6 for other color adjustments Follow these steps to utilize this functionUsing the OSD menu To cancel the timer, perform the following stepsHow to use the Timer ON/SHOW key? Remote paging operationsUtilizing FAQ function Hiding the imageFreezing the image Operating in a high altitude environment To activate the High Altitude ModeLocking control keys Panel Key Lock menu and pressTurning off the Power on/off ring tone Adjusting the soundAdjusting the sound level Creating your own startup screenPersonalizing the On-Screen Display OSD menus Shutting down the projectorIf the projector is not properly On-Screen Display OSD Menus Menu structureMain menu Sub-menu Options Advanced Setup BasicReset All Settings Menu Position Center/Top-Left/Top-Right/BottomDescription of each menu Display menu Picture menuAuto Power Off Save SettingsPresentation Timer Blank TimerSystem Setup Advanced menu Information menu Maintenance Care of the projectorLamp information Extending lamp life Setting Lamp Mode as EconomicSetting Auto Power Off Timing of replacing the lampTo slowly pull the lamp out of the projector Replacing the lampLoosen the screw that secures the lamp Remove the lamp cover from the projectorResetting the lamp timer Settings menuPress Enter and the Lamp Settings Indicators Troubleshooting Specifications Projector specificationsDimensions Supported timing for Component-YPbPrinput Timing chartSupported timing for Analog RGB input Supported timing for Video and S-Video inputsSupported timing for DVI-D Hdcp input SXGA75Other information Regulation statements
Related manuals
Manual 5 pages 12.86 Kb

SP870 specifications

The BenQ SP870 is a cutting-edge projector designed to deliver high-quality visuals for both educational and professional settings. This projector stands out due to its advanced technology and robust features that cater to the demands of various presentations and multimedia applications.

One of the primary characteristics of the SP870 is its impressive resolution. With a native WUXGA resolution of 1920 x 1200, this projector ensures that images and videos are displayed with exceptional clarity and detail. The high resolution is particularly beneficial for presentations that involve intricate graphics, charts, or fine text, allowing viewers to see every detail without straining their eyes.

The SP870 is equipped with a brightness level of up to 5,000 ANSI lumens, making it suitable for use in environments with varying lighting conditions. Whether you're presenting in a well-lit conference room or a dimly lit classroom, the SP870 delivers bright and vibrant images, ensuring that your content is visible and impactful. The projector also features a high contrast ratio, which enhances the depth of colors and provides a more immersive viewing experience.

Another significant aspect of the BenQ SP870 is its color accuracy and technology. It utilizes BrilliantColor technology, which enhances color performance by improving the brightness of colors and allowing for a wider color spectrum. This results in rich, vivid colors that can engage and captivate an audience, making it an excellent choice for creative professionals and educators alike.

In terms of connectivity, the BenQ SP870 offers a variety of ports, including HDMI, VGA, and USB, allowing for easy connection to a range of devices such as laptops, tablets, and media players. This versatility makes it easy to use the projector in multiple settings, from boardrooms to classrooms.

Additionally, the projector is designed with user-friendly features such as a quick start-up time, allowing users to begin their presentations swiftly. Its lamp life, rated up to 4,000 hours in normal mode and 6,000 hours in eco mode, ensures longevity and reduces maintenance costs.

Overall, the BenQ SP870 is a robust projector equipped with high resolution, exceptional brightness, advanced color technologies, and versatile connectivity options. It is an ideal choice for professionals and educators seeking reliable and high-performance projection solutions.