BenQ SP870 Important safety instructions, With all windows rolled up, 3000 m 10000 feet

Page 3

Thank you for your purchase of this quality BenQ projector! It has been designed to provide you with an enjoyable viewing experience in various situations. For the best results, please read this manual through carefully as it is your guide through the control menus and operation.

Important safety instructions

Your projector is designed and tested to meet the latest standards for safety of information technology equipment. However, to ensure safe use of this product, it is important that you follow the instructions mentioned in this manual and marked on the product.

1.

Please read this manual before you operate 5.

Do not place this projector in any of the

 

your projector. Save it for future reference.

following environments.

 

 

- Space that is poorly ventilated or confined.

 

 

Allow at least 50 cm clearance from walls

 

 

and free flow of air around the projector.

 

 

- Locations where temperatures may become

 

 

excessively high, such as the inside of a car

 

 

with all windows rolled up.

 

 

- Locations where excessive humidity, dust, or

 

 

cigarette smoke may contaminate optical

2.

Do not look straight at the projector lens

components, shortening the projector's life

span and darkening the image.

 

during operation. The intense light beam may

 

 

damage your eyes.

3.

Refer servicing to qualified service

 

 

personnel.

- Locations near fire alarms

 

 

 

 

- Locations with an ambient temperature

 

 

above 40°C / 104°F

 

 

- Locations where the altitudes are higher than

 

 

3000 m (10000 feet)

4.

Always open the lens shutter or remove the

 

lens cap when the projector lamp is on.

3000 m

(10000 feet)

0m

(0 feet)

Important safety instructions

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents SP870 Digital Projector WelcomeTable of contents 3000 m 10000 feet Important safety instructionsWith all windows rolled up Cigarette smoke may contaminate opticalImportant safety instructions Ceiling mounting the projector Introduction Projector featuresShipping contents Quick-release foot Projection lens Lens cap Projector exterior viewRear/lower side See Connection on page 16 for connection detailsProjector Controls and functionsDetails Remote controlStarts the FAQ function. See Utilizing FAQ Your own timer setting. See Setting22. D. Zoom + Remote control effective rangeMaking the remote control a wired control Operating the Laser pointerChoosing a location Positioning your projectorObtaining a preferred projected image size Select your screen size Zoom Projection dimensionsTo connect the projector to a notebook or desktop computer Connecting a computer or monitorConnecting a computer ConnectionWith a VGA cable With a VGA to DVI-A cable Connecting a monitorComputer using the D-SUB/COMP. Socket, not the DVI-Dsocket To connect the projector to a monitorBetter video quality Connecting Video source devicesConnecting Audio Best video qualityTo connect the projector to a DVI-D source device Connecting a DVI-D source deviceWith a Component Video to VGA D-Sub adaptor cable Connecting a Component Video source deviceTo connect the projector to a Component Video source device With a Component Video cableTo connect the projector to an S-Video/Video source device Connecting an S-Video or a composite Video source deviceStarting up the projector OperationSecuring the projector Using the On-Screen Display OSD menusUsing a security cable lock Use / to highlight the System Setup Basic menuTo leave the OSD menu, press MENU/EXIT Utilizing the password functionSetting a password If you forget the passwordEntering the password recall procedure Changing the passwordDisabling the password function Changing Color Space Switching input signalFine-tuning the image size and clarity Adjusting the projected imageAdjusting the projection angle Auto-adjusting the imageMagnifying and searching for details Correcting keystonePress About the aspect ratio Selecting the aspect ratioOptimizing the image Using Wall ColorSelecting a picture mode PC input signals D-Sub/Comp. analog RGB, and DVI-D DVI-DFine-tuning the image quality in user modes 3D Color Management Adjusting Brilliant ColorSelecting a color temperature About color temperaturesFollow these steps to utilize this function Setting the presentation timerRepeat steps 3 to 6 for other color adjustments Press MENU/EXIT to exit and save the settingsRemote paging operations To cancel the timer, perform the following stepsHow to use the Timer ON/SHOW key? Using the OSD menuUtilizing FAQ function Hiding the imageFreezing the image Panel Key Lock menu and press To activate the High Altitude ModeLocking control keys Operating in a high altitude environmentCreating your own startup screen Adjusting the soundAdjusting the sound level Turning off the Power on/off ring tonePersonalizing the On-Screen Display OSD menus Shutting down the projectorIf the projector is not properly On-Screen Display OSD Menus Menu structureMain menu Sub-menu Options Menu Position Center/Top-Left/Top-Right/Bottom Setup BasicReset All Settings AdvancedDisplay menu Picture menu Description of each menuBlank Timer Save SettingsPresentation Timer Auto Power OffSystem Setup Advanced menu Information menu Maintenance Care of the projectorLamp information Timing of replacing the lamp Setting Lamp Mode as EconomicSetting Auto Power Off Extending lamp lifeRemove the lamp cover from the projector Replacing the lampLoosen the screw that secures the lamp To slowly pull the lamp out of the projectorResetting the lamp timer Settings menuPress Enter and the Lamp Settings Indicators Troubleshooting Specifications Projector specificationsDimensions Supported timing for Video and S-Video inputs Timing chartSupported timing for Analog RGB input Supported timing for Component-YPbPrinputSXGA75 Supported timing for DVI-D Hdcp inputRegulation statements Other information
Related manuals
Manual 5 pages 12.86 Kb

SP870 specifications

The BenQ SP870 is a cutting-edge projector designed to deliver high-quality visuals for both educational and professional settings. This projector stands out due to its advanced technology and robust features that cater to the demands of various presentations and multimedia applications.

One of the primary characteristics of the SP870 is its impressive resolution. With a native WUXGA resolution of 1920 x 1200, this projector ensures that images and videos are displayed with exceptional clarity and detail. The high resolution is particularly beneficial for presentations that involve intricate graphics, charts, or fine text, allowing viewers to see every detail without straining their eyes.

The SP870 is equipped with a brightness level of up to 5,000 ANSI lumens, making it suitable for use in environments with varying lighting conditions. Whether you're presenting in a well-lit conference room or a dimly lit classroom, the SP870 delivers bright and vibrant images, ensuring that your content is visible and impactful. The projector also features a high contrast ratio, which enhances the depth of colors and provides a more immersive viewing experience.

Another significant aspect of the BenQ SP870 is its color accuracy and technology. It utilizes BrilliantColor technology, which enhances color performance by improving the brightness of colors and allowing for a wider color spectrum. This results in rich, vivid colors that can engage and captivate an audience, making it an excellent choice for creative professionals and educators alike.

In terms of connectivity, the BenQ SP870 offers a variety of ports, including HDMI, VGA, and USB, allowing for easy connection to a range of devices such as laptops, tablets, and media players. This versatility makes it easy to use the projector in multiple settings, from boardrooms to classrooms.

Additionally, the projector is designed with user-friendly features such as a quick start-up time, allowing users to begin their presentations swiftly. Its lamp life, rated up to 4,000 hours in normal mode and 6,000 hours in eco mode, ensures longevity and reduces maintenance costs.

Overall, the BenQ SP870 is a robust projector equipped with high resolution, exceptional brightness, advanced color technologies, and versatile connectivity options. It is an ideal choice for professionals and educators seeking reliable and high-performance projection solutions.
Top Page Image Contents