BenQ SP870 user manual Using the On-Screen Display OSD menus, Securing the projector

Using the On-Screen Display (OSD) menus

The projector is equipped with On-Screen Display (OSD) menus for making various adjustments and settings. Below is the overview of the OSD menu.

Main menu icon
Main menu	DISPLAY			Off
		Wall Color
		Aspect Ratio		Auto
Highlight		Keystone
		Position	0	ENTER
Sub-menu		Phase
		H. Size	0
		Digital Zoom

Status

Press MENU/EXIT back to the previous page or to exit.

Current input signal Analog RGB MENU Exit

To use the OSD menus, please set the OSD menu to your familiar language first.

1. Press MENU/EXIT on the projector or remote control 2.	Press to highlight Language and press
to turn the OSD menu on.	/ to select a preferred language.
DISPLAY	SYSTEM SETUP: Basic

Wall Color	Off
Aspect Ratio	Auto
Keystone
Position
Phase	0
H. Size	0
Digital Zoom
Analog RGB	MENU Exit

3.Use / to highlight the SYSTEM SETUP: Basic menu.

SYSTEM SETUP: Basic

Presentation Timer
Language	English
Projector Position	Front Table
Auto Power Off	Disable
Blank Timer	Disable
Panel Key Lock	Off
Timer Controller	Disable
Splash Screen	BenQ
My Screen
Analog RGB	MENU Exit

Presentation Timer
Language	English
Projector Position	Front Table
Auto Power Off	Disable
Blank Timer	Disable
Panel Key Lock	Off
Timer Controller	Disable
Splash Screen	BenQ
My Screen
Analog RGB	MENU Exit

4.Press MENU/EXIT twice* on the projector or remote control to leave and save the settings.

*The first press leads you back to the main menu and the second press closes the OSD menu.

Securing the projector

Using a security cable lock

The projector has to be installed in a safe place to prevent theft. Otherwise, purchase a lock, such as a Kensington lock, to secure the projector. You can locate a Kensington lock slot on the rear side of the projector. See item 27 on page 8 for details.

A Kensington security cable lock is usually a combination of key(s) and a lock. Refer to the lock’s documentation for finding out how to use it.

Operation 23