BenQ SP870 3D Color, Management, Save Settings, Quick Auto Search, Color Space, Conversion

Page 42

 

FUNCTION

 

(default setting/value)

2.

3D Color

PICTURE menu

Management

Save Settings

 

3 Quick Auto Search

.

(On)

SOURCE menu

(RGB)

 

Color Space

 

Conversion

 

Presentation Timer

 

Language

4.

Projector Position

SYSTEM

(Front Table)

Auto Power Off

 

SETUP:

(Disable)

Blank Timer

 

 

(Disable)

Basic

Panel Key Lock

(Off)

 

menu

Timer Controller

(Disable)

 

 

Splash Screen

 

(BenQ logo)

 

My Screen

5 Quick Cooling

.SYSTEM Advanced

(On)

High Altitude Mode

 

SETUP: menu

(Off)

Audio Settings

 

DESCRIPTION

See "3D Color Management" on page 32 for details.

Saves the settings made for User 1 or User 2 mode.

See "Switching input signal" on page 26 for details.

See "Changing Color Space" on page 26 for details.

Reminds the presenter to finish the presentation within a certain time frame. See "Setting the presentation timer" on page 33 for details.

Sets the language for the On-Screen Display (OSD) menus. See "Using the On-Screen Display (OSD) menus" on page 23 for details.

The projector can be installed on a ceiling or behind a screen, or with one or more mirrors. See "Choosing a location" on page 12 for details.

Allows the projector to turn off automatically if no input signal is detected after a set period of time. See "Setting Auto Power Off" on page 45 for details.

Sets the image blank time when the Blank feature is activated, once elapsed the image will return to the screen. See "Hiding the image" on page 35 for details.

Disables or enables all panel key functions except Power on the projector and keys on the remote control. See "Locking control keys" on page 36 for details.

Sets the auto-shutdown timer. The timer can be set to a value between 30 minutes and 12 hours.

Allows you to select which logo screen will display during projector start- up. Four options are available: BenQ logo, Black screen, Blue screen or My Screen.

Captures and stores the projected picture as My Screen. See "Creating your own startup screen" on page 37 for details.

Enables or disables the Quick Cooling function. Selecting On enables the function and projector cooling time will be shortened from a normal 90- second duration to approximately 30 seconds.

If you attempt to restart the projector right after the 30-second quick cooling process, it will rerun its cooling fans for approximately 60 seconds before energizing the lamp.

A mode for operation in high altitude areas. See "Operating in a high altitude environment" on page 36 for details.

Mute (Off)

Volume (5)

Power on/off ring tone (On)

See "Adjusting the sound" on page 37 for details.

42 Operation

Page 41 Page 43
Image 42
Page 41 Page 43
Contents Welcome SP870 Digital ProjectorTable of contents Cigarette smoke may contaminate optical Important safety instructionsWith all windows rolled up 3000 m 10000 feetImportant safety instructions Ceiling mounting the projector Projector features IntroductionShipping contents See Connection on page 16 for connection details Projector exterior viewRear/lower side Quick-release foot Projection lens Lens capControls and functions ProjectorYour own timer setting. See Setting Remote controlStarts the FAQ function. See Utilizing FAQ DetailsOperating the Laser pointer Remote control effective rangeMaking the remote control a wired control 22. D. Zoom +Positioning your projector Choosing a locationObtaining a preferred projected image size Select your screen size Projection dimensions ZoomConnection Connecting a computer or monitorConnecting a computer To connect the projector to a notebook or desktop computerTo connect the projector to a monitor Connecting a monitorComputer using the D-SUB/COMP. Socket, not the DVI-Dsocket With a VGA cable With a VGA to DVI-A cableBest video quality Connecting Video source devicesConnecting Audio Better video qualityConnecting a DVI-D source device To connect the projector to a DVI-D source deviceWith a Component Video cable Connecting a Component Video source deviceTo connect the projector to a Component Video source device With a Component Video to VGA D-Sub adaptor cableConnecting an S-Video or a composite Video source device To connect the projector to an S-Video/Video source deviceOperation Starting up the projectorUse / to highlight the System Setup Basic menu Using the On-Screen Display OSD menusUsing a security cable lock Securing the projectorIf you forget the password Utilizing the password functionSetting a password To leave the OSD menu, press MENU/EXITEntering the password recall procedure Changing the passwordDisabling the password function Switching input signal Changing Color SpaceAuto-adjusting the image Adjusting the projected imageAdjusting the projection angle Fine-tuning the image size and clarityMagnifying and searching for details Correcting keystonePress Selecting the aspect ratio About the aspect ratioPC input signals D-Sub/Comp. analog RGB, and DVI-D DVI-D Using Wall ColorSelecting a picture mode Optimizing the imageFine-tuning the image quality in user modes About color temperatures Adjusting Brilliant ColorSelecting a color temperature 3D Color ManagementPress MENU/EXIT to exit and save the settings Setting the presentation timerRepeat steps 3 to 6 for other color adjustments Follow these steps to utilize this functionUsing the OSD menu To cancel the timer, perform the following stepsHow to use the Timer ON/SHOW key? Remote paging operationsUtilizing FAQ function Hiding the imageFreezing the image Operating in a high altitude environment To activate the High Altitude ModeLocking control keys Panel Key Lock menu and pressTurning off the Power on/off ring tone Adjusting the soundAdjusting the sound level Creating your own startup screenPersonalizing the On-Screen Display OSD menus Shutting down the projectorIf the projector is not properly On-Screen Display OSD Menus Menu structureMain menu Sub-menu Options Advanced Setup BasicReset All Settings Menu Position Center/Top-Left/Top-Right/BottomDescription of each menu Display menu Picture menuAuto Power Off Save SettingsPresentation Timer Blank TimerSystem Setup Advanced menu Information menu Maintenance Care of the projectorLamp information Extending lamp life Setting Lamp Mode as EconomicSetting Auto Power Off Timing of replacing the lampTo slowly pull the lamp out of the projector Replacing the lampLoosen the screw that secures the lamp Remove the lamp cover from the projectorResetting the lamp timer Settings menuPress Enter and the Lamp Settings Indicators Troubleshooting Specifications Projector specificationsDimensions Supported timing for Component-YPbPrinput Timing chartSupported timing for Analog RGB input Supported timing for Video and S-Video inputsSupported timing for DVI-D Hdcp input SXGA75Other information Regulation statements
Related manuals
Manual 5 pages 12.86 Kb

SP870 specifications

The BenQ SP870 is a cutting-edge projector designed to deliver high-quality visuals for both educational and professional settings. This projector stands out due to its advanced technology and robust features that cater to the demands of various presentations and multimedia applications.

One of the primary characteristics of the SP870 is its impressive resolution. With a native WUXGA resolution of 1920 x 1200, this projector ensures that images and videos are displayed with exceptional clarity and detail. The high resolution is particularly beneficial for presentations that involve intricate graphics, charts, or fine text, allowing viewers to see every detail without straining their eyes.

The SP870 is equipped with a brightness level of up to 5,000 ANSI lumens, making it suitable for use in environments with varying lighting conditions. Whether you're presenting in a well-lit conference room or a dimly lit classroom, the SP870 delivers bright and vibrant images, ensuring that your content is visible and impactful. The projector also features a high contrast ratio, which enhances the depth of colors and provides a more immersive viewing experience.

Another significant aspect of the BenQ SP870 is its color accuracy and technology. It utilizes BrilliantColor technology, which enhances color performance by improving the brightness of colors and allowing for a wider color spectrum. This results in rich, vivid colors that can engage and captivate an audience, making it an excellent choice for creative professionals and educators alike.

In terms of connectivity, the BenQ SP870 offers a variety of ports, including HDMI, VGA, and USB, allowing for easy connection to a range of devices such as laptops, tablets, and media players. This versatility makes it easy to use the projector in multiple settings, from boardrooms to classrooms.

Additionally, the projector is designed with user-friendly features such as a quick start-up time, allowing users to begin their presentations swiftly. Its lamp life, rated up to 4,000 hours in normal mode and 6,000 hours in eco mode, ensures longevity and reduces maintenance costs.

Overall, the BenQ SP870 is a robust projector equipped with high resolution, exceptional brightness, advanced color technologies, and versatile connectivity options. It is an ideal choice for professionals and educators seeking reliable and high-performance projection solutions.
Top Page Image Contents