Barco 4MP/6MP manual Settings menu, Dpms

Settings menu

DPMS	Allows to switch the display power
	management system on/off. See note
	below.
Power LED	Allows to switch the power LED’s on state
	on/off. The LED's orange DPMS state is not
	influenced by this setting. So, when the
	display goes into power-saving mode, the
	LED will turn orange, even if it was
	switched off by this setting
User controls	Allows to disable the user controls on the
	front.
	When switched off, the user cannot display
	the OSD until the user controls keycode is
	entered.
	To enable the user controls again, To
	enable the user controls again using the
	touch keys:, on page 40 or To enable the
	user controls again using the control
	wheel:, on page 40
Sound	Allows to switch the sound on/off. When
	switched on, a short beep sounds each
	time you touch a soft touch key.
Auto menu exit	Allows to switch the automatic menu exit
	on/off. When switched on, the OSD is
	closed automatically when left idle for a
	certain time.

36 Coronis Fusion 4MP/6MP