ALC & DICOM Options
Continuous DICOM ALC
INTRODUCTION
When you select the DICOM DF, the display offers the possibility to take the ambient light into account for calculating the DICOM display function. This function is called Continuous DICOM ALC (ALC is short for Ambient Light Compensation).
When Continuous DICOM ALC is switched on, the display will continuously adapt the DICOM DF based on the average measured ambient light.
When it is switched off, the DICOM DF will be recalculated only when another DICOM Offset is selected.
TO SWITCH CONTINUOUS DICOM ALC ON/OFF:
1Select the DICOM display function. See To select a display function (DF):, on page 43
2In the Display Function menu, select ALC & DICOM Options.
3In the ALC & DICOM Options submenu, select Cont. DICOM ALC.
4Select On or Off.
5Return to the ALC & DICOM Options menu.
The ambient light is measured by the ALC sensor at the front.
DICOM offset
INTRODUCTION
When Continuous DICOM ALC is switched off, the DICOM DF will be recalculated only when another DICOM Offset is selected. The DICOM DF will be recalculated based on the new offset setting.