Barco 4MP/6MP manual Reading Room Definition Submenu

Calibration info	Jumps to the calculation information
	submenu, which displays information
	about the values taken into account to
	recalculate the DICOM DF.

READING ROOM DEFINITION SUBMENU

Measured ambient	Indicates the ambient light actually
light	measured by the ambient light sensor on
	the front of the display. This is a read-only
	value.
Averaged ambient	Shows the average of the measured
light	ambient light since the display was
	switched on. This is a read-only value.
Reading room	Indicates the reading room type you are
	editing. You can select another room to
	edit by using the Up or Down touch
	keys or rotating the control wheel.
Max. ambient light	This indicates the maximum ambient light
	that corresponds to the selected reading
	room.
	If the measured ambient light is higher
	than the value entered here, you should
	take measures to darken the room or
	select another reading room type.
Preset corr. value	This value is taken into account in the
	calculation of the DICOM DF if Continuous
	DICOM ALC is switched off and DICOM
	Offset is set to “Preset”.
	To each reading room type corresponds
	another preset value.

34 Coronis Fusion 4MP/6MP