Barco 4MP/6MP manual Not be easily readable

Page 37

OSD Orientation

Select the desired orientation of the on-

 

screen display. The default position is

 

Landscape, but if you put the display in

 

portrait orientation (possible but not

 

supported), you should select Portrait as

 

OSD orientation as well. If not, the OSD will

 

not be easily readable.

 

 

Input Switch Mode

Select “Auto” if you wish the display to

 

select the video inputs automatically. If

 

only one video input is connected, the

 

image will be shown in the center of the

 

screen. If both video inputs are connected,

 

the video signal connected to the “Left”

 

input is shown on the left side of the

 

screen and the signal connected to the

 

“Right” connector is shown on the right

 

side. If one of the video signals exceeds

 

the resolution of 1640x2048, the signal is

 

suppressed.

 

Select “Left” to display only the signal

 

connected to the “Left” video input.

 

Select “Right” to display only the signal

 

connected to the “Right” video input.

 

 

Preferred Input

Select the video resolution you wish the

 

connected graphic board(s) to reproduce.

 

Before changing this setting you must

 

switch off the PC. After changing the

 

setting, switch on the PC so that the

 

graphic board changes its resolution.

 

This function takes effect with plug-and-

 

play graphic boards only.

 

More information can also be found in the

 

Getting Started manual.

 

 

Coronis Fusion 4MP/6MP 37

Image 37
Contents Coronis Fusion 4MP/6MP This page intentionally left blank Welcome This page intentionally left blank Table of contents Cleaning your display Whats in the box Front view Parts, controls and connectorsRear view Coronis Fusion 4MP Coronis Fusion 6MP Connector Compartment Cover Display installationRemoving the covers Display Stand Cover Unlocking the height mechanism Adjusting the display position Connecting the signal cables Routing the cables Connecting the power cablesRe-attaching the covers VESA-mount installation Coronis Fusion 4MP/6MP First time starting up Recommendations for daily operation Daily operationOptimize the Lifetime of Your Display USE a Screen Saver to Avoid Image RetentionMaximize Quality Assurance Enhance User ComfortUsing the Touch Keys Stand-by switchingUsing the Control Wheel Bringing up the OSD menuNavigating through the OSD menus Changing values in the OSD menus Making selections in the OSD menusInfo messages Advanced operationLCM Temperature Sensor OFF Line LCM Temperature TOO HighLuminance and color menu On-screen display OSDColor Definition Submenu Display Function menu ALC & Dicom Options Submenu Recalculated at the moment the Dicom Reading Room Definition Submenu Calibration Information Submenu Dpms Settings menuNot be easily readable Information menu Enabling/disabling User Controls Changing the viewing modeTo Enable the User Controls Again Using the Control Wheel To Enable the User Controls Again Using the Touch KeysSwitching Dpms on/off Switching Power LED on/offTo Switch the Power LED ON/OFF To Switch Dpms ON/OFFConcepts Changing Display FunctionsDicom To Select a Display Function DFIntroduction To Switch Continuous Dicom ALC ON/OFFTo Select a Dicom Offset Reading room selectionDRR CR/DR/MAMMO To Select a Reading Room SettingDRR CT/MR/NM To Modify a Reading Room Definition Reading room definitionCoronis Fusion 4MP/6MP Front glass Cleaning your displayCabinet Important information Safety informationPower Cords Power Connection Display with External 24 VDC Power SupplyInstallation Water and MoistureCoronis Fusion 6MP Conforms to Coronis Fusion 4MP Conforms toNational Scandinavian Deviations for CL Mercury Notice Environmental informationTurkey Rohs Compliance PBB Pbde Power supply unit Indications for USE Coronis Fusion 4MP Regulatory compliance informationIndications for USE Coronis Fusion 6MP Canadian Notice Explanation of symbolsTo the c-UL regulations Disclaimer Notice Legal disclaimerTrademarks Copyright NoticeTechnical specifications DVI-DMPM IEC Coronis Fusion 6MP DVI-DMPM IIb, FDA 510k, RoHS Supplied accessories Barco MID General Warranty Terms and Conditions Warranty statementCoronis Fusion 4MP/6MP Article 3 Obligations of the Customer Article 8 General This page intentionally left blank 0120