Barco 4MP/6MP manual On-screen display OSD, Luminance and color menu

On-screen display (OSD)

Luminance and color menu

Measured luminance	Indicates the actual luminance measured
	by the internal sensor. This is a read-only
	value. It is expressed in cd/m2.
Luminance target	Allows to manually adjust the luminance
	target. See note below.
Color target	Allows to select from a list of factory-
	defined and user-defined color targets.
Viewing mode	Allows to select the viewing mode:
	Diagnostic or Text. In text mode the
	luminance is approximately half of the
	luminance in diagnostic mode. This is
	intended for use with office applications
	such as word processing. You can also
	switch between both modes by touching
	the up and down keys at the same
	time while the OSD is not on the screen.
Color definition	Jumps to the color definition submenu,
	which allows to change the definition of
	the user-defined color targets.

When you change the luminance target, the display will adjust its backlight to reach the target. This can be seen in the Measured luminance line.

When the luminance target cannot be reached, e.g., due to aging of the backlight, the Measured luminance line changes to Minimum value reached or Maximum value reached.

Coronis Fusion 4MP/6MP 29