20 en Configuration | ATM/POS Bridge |
|
|
–Bridge Name: Type an optional name for the bridge in the Bridge Name input box. This name facilitates recognition of the bridge on the network.
–IP Address: Displays the current IP Address for the bridge. You can type a new IP Address in the input box.
–Subnet Mask: Displays the current Subnet Mask for the bridge. You can type a new Subnet Mask in the input box.
–Default Gateway: Displays the current Gateway Address for the bridge. You can type a new Gateway Address in the input box.
–Recorder TCP Port: Displays the TCP port number where the recorder listens for the bridge device. You can type a new port number in the input box.
–Service TCP Port: Displays the TCP port where the bridge listens for CLI commands. (The bridge supports CLI commands which are used to read and change settings in the bridge.)
–Tx Server TCP Port: Displays the TCP port number where the bridge listens for the server that receives transaction data from the POS or ATM devices on the network. You can type a new port number in the input box.
–Device Detection: Enables or disables the Bridge Detection utility to find the bridge on a network.
NOTICE!
It is recommended to disable this feature once the network settings are configured.
–MAC Address: Displays the MAC Address for the bridge. This value cannot be changed.
F.01U.171.816 1.0 2010.09 | Installation Manual | Bosch Security Systems, Inc. |