ATM/POS Bridge | Configuration en 21 |
|
|
5.2.3Terminal
The Terminal Setup pages allow you to configure the bridge to accept transactions from the ATM/POS devices connected to the bridge.
–Name: Type an optional name for the terminal. This name facilitates recognition of the terminal on the network
–Device: Select the type of POS or ATM device. You can choose one of these options:
–Specific Device: The bridge converts the characters from the terminal based on the code page setting of the terminal and the recording language selected on the bridge System menu.
–Transparent: The bridge receives all characters from an ATM/POS terminal in a complete line without protocol conversion; then transmits the complete line to a recording device. The bridge does not perform character conversion.
–Capture: The bridge receives all characters from an ATM/POS terminal one character at a time; then transmits an individual character to a recording device. The bridge does not perform character conversion.
Bosch Security Systems, Inc. | Installation Manual | F.01U.171.816 1.0 2010.09 |