Bosch Appliances DVRXEAP01 Configuring Bridge Operation via HyperTerminal, Network Setup

Page 26

26 en Configuration Using HyperTerminal	ATM/POS Bridge

6.3Configuring Bridge Operation via HyperTerminal

After you establish a HyperTerminal connection between a PC and the bridge, use the menu structure to configure the bridge settings. Press the F1 key to open the System Options menu, then select 1 - Network Setup.

6.3.1Network Setup

The Network Setup enables you to provide a label for the bridge and to configure network settings.

CAUTION!

Changing a parameter on the Network Setup page may interrupt the operation of the ATM/POS Bridge. Contact your network administrator before making any changes.

F.01U.171.816 1.0 2010.09

Installation Manual

Bosch Security Systems, Inc.

Image 26

Contents ATM/POS Bridge Page Table of Contents Configuration Using HyperTerminal Troubleshooting Technical Data Updating Bridge FirmwareSafety Type numbersEn Safety ATM/POS Bridge FCC & Ices compliance FCC & Ices InformationInformations FCC et Ices Supported Protocols Parts ListDescription System Overview POS terminal networkInstallation Mounting the BridgeCOM 1 RS232 connector Making Connections to the BridgeATM/POS Bridge Installation en RS232 Console RS485 COM Connector DetailPin Using the Bridge Detector Utility ConfigurationConfiguring the Bridge for a Network Connection Using the Direct Connection ATM/POS Bridge Configuration en Configuring Operation via a Network System MenuNetwork Setup En Configuration ATM/POS Bridge Terminal En Configuration ATM/POS Bridge COM Port Initiating a HyperTerminal Session Configuration Using HyperTerminalConnecting the Bridge ATM/POS Bridge Configuration Using HyperTerminal en Configuring Bridge Operation via HyperTerminal ATM/POS Bridge Configuration Using HyperTerminal en Communication Channels Terminal Setup En Configuration Using HyperTerminal ATM/POS Bridge Simulation Mode Recording LanguageService Menu Troubleshooting Technical Data EMC Updating Bridge Firmware ATM/POS Bridge 38 en ATM/POS Bridge ATM/POS Bridge 40 en ATM/POS Bridge Troubleshooting Bridge Firmware Update 42 en ATM/POS Bridge Page Bosch Security Systems, Inc