Rackmount Solutions RP-919QD, RP-W819QD, RP-817QD, RP-W119QD, RP-120QD For LCD OSD Menu, Membrane

Page 30

10.1 On-screen Display Operation

Chapter 10

			LCD + Quad display
LCD OSD	Men	u	membrane
	Men

			Cont	rol	>
		play	Cont		<
	d Dis	play		<	<
Qua	d Dis			<
		<

LCD OSD Menu

<

<

For LCD OSD Menu

Power light

Green = On

Orange = Power saving

Power on / off LCD

Display the OSD menu

Scrolls through menu options and adjusts the displayed control

Exit the OSD screen

Shortcut key to auto adjustment by pressed the button for 5 seconds or

Toggle analog, digital & video connection (DVI-D and video options only)

For Quad Display Control

Remarks :

■Quad Display Control please refer to P.39 - 44

P.26

Image 30

Contents Page RP-W119QD Part 2 43 LCD Quad Display RP-817QD, RP-919QD & RP-1020QD Blank Chapter Page Before Installation Combo Cat6 KVM Matrix Cat6 KVMMatrix DB-15 KVM Combo DB-15 KVMPackage Contents Structure Diagram RP-W819QD & RP-W922QD RP-W819QD RP-W922QD Connection RP-W819QD & RP-W922QD RP-W119QD One Man Installation Slides Thumb Screw LCD interchangeable module kitHow to Use the Slides RP-W119QD Connection LCD Speciﬁcations RP-W922QD, RP-W819QD & RP-W119QD D x H RP-817QD, RP-919QD & RP-1020QD Structure Diagram RP-817QD, RP-919QD & RP-1020QD Installation RP-817QD, RP-919QD & RP-1020QD Connection RP-817QD, RP-919QD & RP-1020QD RP-117QD, RP-119QD & RP-120QD Structure Diagram RP-117QD, RP-119QD & RP-120QD How to Use the Slides RP-117QD, RP-119QD & RP-120QD Connection LCD Speciﬁcations D x H Weight RP117QD seriesFor LCD OSD Menu MembraneOn-screen Menu VCR out Ch1 In, Ch2 In, Ch3 In, and Ch4 In Video in connectorsVCR TerminationsAlarm I/O VCR Connection for Tape Recording Start and Stop ControlSensor Activated Alarm Video Loss AlarmChapter Pin assignment of the male type 9 pin D-sub connector 3 4XX-DF Byte Start Stop Start Channel SelectChapter Quad CH Select Function Button #2 Button #4 Button #5 Setup buttons #1, #2 Function CH Select buttons #5Quad Display Control Quad button #4 Channel Select buttons #5 FunctionDwell Time setup 1 of the Setup Menu Display SettingTitle setup TIME/DATE setupLoss Alarm 2 of the setup menu- Alarm SettingAlarm Hold Duration Save the settings and exit Setup Menu modeStill Frame Display Mode Quad Display ModeFull Screen Display Mode Auto-Sequence ModeVCR Operations Input rating Output ratingEfﬁciency Troubleshooting Blank