Rackmount Solutions RP-117QD of the setup menu- Alarm Setting, Sensitivity, Alarm Hold Duration

Page 42

11.5 Quad Display On-screen Menu

Chapter 11

2 Page 2 of the setup menu- Alarm Setting

Push Setup buttons (#1, #2) simultaneously and push (#1) button again to display page 2 of the setup menu on the screen. This Alarm Setting menu is used to set the desired alarm configuration like buzzer, V-loss alarm and V-loss relay.

 

ALARM SETTING

 

CH

SENSOR

TYPE

STATUS

1

OPEN

NO

ON

2

OPEN

NO

ON

3

OPEN

NO

ON

4

OPEN

NO

ON

SENSITIVITY:

 

0.3 S

DURATION:

 

30 S

BUZZER:

 

 

ON

V-LOSS ALARM:

 

ON

V-LOSS RELAY:

 

OFF

2.1 Sensitivity:

The features are not applicable in these model.

2.2 Alarm Hold Duration:

The features are not applicable in these model.

2.3 Buzzer:

The device has a build-in buzzer to signal a detected alarm through sound. User can choose to disable the buzzer by setting it to OFF.

2.4 V-Loss Alarm:

This entry is used to enable or disable the video loss alarm. The device automatically detects loss of video at any input if this entry is set to ON. User can choose to disable this feature by setting it to OFF for applications like video conferenc- ing or others that will need constant video source switching.

2.5 V-Loss Relay Control:

The device is equipped with an alarm controlled relay, which can be activated by both sensor trigged alarm and video loss alarm. This entry allows user to disable the relay activation from a loss of video in any camera input.

3 Save the settings and exit Setup Menu mode

Push (#1) button again will allow you to save the settings and go back to the normal operation mode and show a quad display on the screen.

P.38

Image 42
Contents Page RP-W119QD Part 2 43 LCD Quad Display RP-817QD, RP-919QD & RP-1020QD Blank Chapter Page Before Installation Combo Cat6 KVM Matrix Cat6 KVMMatrix DB-15 KVM Combo DB-15 KVMPackage Contents Structure Diagram RP-W819QD & RP-W922QD RP-W819QD RP-W922QD Connection RP-W819QD & RP-W922QD RP-W119QD One Man Installation Slides Thumb Screw LCD interchangeable module kitHow to Use the Slides RP-W119QD Connection LCD Specifications RP-W922QD, RP-W819QD & RP-W119QD D x H RP-817QD, RP-919QD & RP-1020QD Structure Diagram RP-817QD, RP-919QD & RP-1020QD Installation RP-817QD, RP-919QD & RP-1020QD Connection RP-817QD, RP-919QD & RP-1020QD RP-117QD, RP-119QD & RP-120QD Structure Diagram RP-117QD, RP-119QD & RP-120QD How to Use the Slides RP-117QD, RP-119QD & RP-120QD Connection LCD Specifications D x H Weight RP117QD seriesFor LCD OSD Menu MembraneOn-screen Menu VCR out Ch1 In, Ch2 In, Ch3 In, and Ch4 In Video in connectorsVCR TerminationsAlarm I/O VCR Connection for Tape Recording Start and Stop ControlSensor Activated Alarm Video Loss AlarmChapter Pin assignment of the male type 9 pin D-sub connector 3 4XX-DF Byte Start Stop Start Channel SelectChapter Quad CH Select Function Button #2 Button #4 Button #5 Setup buttons #1, #2 Function CH Select buttons #5Quad Display Control Quad button #4 Channel Select buttons #5 FunctionDwell Time setup 1 of the Setup Menu Display SettingTitle setup TIME/DATE setupLoss Alarm 2 of the setup menu- Alarm SettingAlarm Hold Duration Save the settings and exit Setup Menu modeStill Frame Display Mode Quad Display ModeFull Screen Display Mode Auto-Sequence ModeVCR Operations Input rating Output ratingEfficiency Troubleshooting Blank