11.3 Remote Control Connection & Operation | Chapter 11 |
*1. For
Example: Input GE, (GE) B, (GE) C, and (GE) D for zooming the video signal in channel 1 to 4 from VCR/DVR. Input “A”, “B”, “C”, “D” again to freeze the specific channel. Send command code “G” again to get back to Live input mode.
*2. Computer has to send out command code “H” continuously for 2 seconds to switch the device be- tween security lock ON and OFF mode. If any alarm is activated under security lock ON mode, the device has to send out command code “H” continuously for more than 4 seconds to clear the alarm.
*3. Setup menu is switched ON by sending VCR/DVR and Lock button codes together.
*4. Text Select and Cursor Control functions can be performed only under menu Setup mode.
2.2Right after computer/terminal has sent out the above mentioned control command code to the device, the devic will respond with following status code back to computer through
Status | Quad Status | Status | Quad Status |
Code |
| Code |
|
EF | Device in Quad mode | DE | CH1 in Sequence mode |
EE | CH1 in Freeze mode | DD | CH2 in Sequence mode |
ED | CH2 in Freeze mode | DB | CH3 in Sequence mode |
EC | CH1 & 2 in Freeze mode | D7 | CH4 in Sequence mode |
EB | CH3 in Freeze mode | CF | Quad display in Sequence mode |
EA | CH1 & 3 in Freeze mode |
|
|
E9 | CH2 & 3 in Freeze mode | E | CH1 in Full screen mode |
E8 | CH1, 2, & 3 in Freeze mode | D | CH2 in Full screen mode |
E7 | CH4 in Freeze mode | B | CH3 in Full screen mode |
E6 | CH1 & 4 in Freeze mode | 7 | CH4 in Full screen mode |
E5 | CH2 & 4 in Freeze mode |
|
|
E4 | CH1, 2 & 4 in Freeze mode |
| Attach to above code |
E3 | CH3 & 4 in Freeze mode |
| Buzzer/VCR ON |
E2 | CH1, 3, & 4 in Freeze mode | Security lock ON | |
E1 | CH2, 3, & 4 in Freeze mode | Buzzer & Security lock ON (Stop) | |
E0 | CH1, 2,3, & 4 in Freeze mode |
|
|
P.33