3M MP8650 manual Safeguards, Intended USE

Page 5

Safeguards

INTENDED USE

Before operating the machine, please read the entire manual thoroughly. The 3MMultimedia Projector MP8650 was designed, built and tested for use indoors, using 3Mbrand lamps and nominal local voltages. The use of other replacement lamps, outdoor operation or different voltages has not been tested and could damage the projector or peripheral equipment and/or create a potentially unsafe operating condition.

IMPORTANT SAFEGUARDS

1.Read and understand all instructions before using. Pay particular attention to areas where this symbol ! is shown.

!WARNING ± Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

!Caution ± Indicates a potentially hazardous situation which, if not avoided, could result in minor or moderate injury. It may also be used to alert against unsafe practices.

2.Close supervision is necessary when any appliance is used by or near children. Do not leave appliance unattended while in use.

3.Never look directly into the projector lens when the lamp is on. The metal halide lamp produces a strong light which could damage your eyesight.

!4. Care must be taken as burns can occur from touching hot parts.

5.Do not operate appliance with a damaged cord or if the appliance has been dropped or damaged Ð until it has been examined by a qualified service technician.

!6. Position the cord so that it will not be tripped over, pulled or contact hot surfaces.

7.If an extension cord is necessary, a cord with a current rating at least equal to that of the appliance should be used. Cords rated for less amperage than the appliance may overheat.

8.Always unplug appliance from electrical outlet before cleaning and servicing and when not in use. Grasp plug and pull to disconnect.

9.To reduce the risk of electric shock, do not immerse this appliance in water or other liquids.

10.To reduce the risk of electric shock, do not disassemble this appliance, but take it to a qualified technician when service or repair work is required. Incorrect reassembly can cause electric shock when the appliance is subsequently used.

11.The use of an accessory attachment not recommended by the manufacturer may cause a risk of fire, electric shock, or injury to persons.

12.Connect this appliance to a grounded outlet.

!13. This unit is equipped with optical lenses and should not be exposed to direct sunlight.

14.Keep ventilation openings free of any obstructions.

15.Always remove the lens cap when the projection lamp is on.

SAVE THESE INSTRUCTIONS

The information contained in this manual will help you operate and maintain your 3M MP8650 Multimedia Projector.

3M 1997

3M

Multimedia Projector MP8650

1

 

 

Image 5
Contents MP8650 Multimedia Projector Operators Guide Were easy to reach Remote Control Set UpMaintenance UnpackTechnical Specifications TroubleshootingAccessories Appendix Technical InformationIntended USE SafeguardsThank YOU for Choosing 3M WarrantyUnpack Contents of Shipping BoxInventory List Keep Your Packing MaterialsParts Identification List Machine CharacteristicsProduct Description Terminal Connection Panel Set UpCable Connections Computer RGB Input Connection Power ConnectionMonitor Loop-Through 640 x 480 mode Video/Audio Connection Video ConnectionPC Serial Mouse Cable RS-232C Serial Cable/Mouse Receiver ConnectionAmbient Light Projector Set UpDistance to Viewing Screen Carrying HandleRear Projection Adjusting the Projector ElevationNow What? Turning On the Projector Operating the ProjectorAdjusting the Picture Adjusting Image Size and FocusAdjusting the Volume Inverting the Image Memory FunctionImage Position Video SystemTurning Off the Projector Setting Apple Macintosh Monitor Mode Windowed or CompressedMenu Languages Remote Control Buttons Remote ControlHow to Operate the Remote Control Replacing the Batteries Using the Mouse ButtonsMouse Receiver ± Apple Macintosh computer only Metal Halide Projector Lamp Lamp InformationDisplay Lamp Operation Hours Change Lamp MessageCleaning MaintenanceProblem Possible Solutions TroubleshootingService Information Video Input Signal Terminal Technical SpecificationsSpecifications Diagonal Width Height Physical DimensionsProjector-to-Screen Distances Computer Video RGB Input Terminal Computer RGB Signal Connection ModesAppendix Technical Information ±1. MP8650 Lamp Replacement 110V machines onlyRead Command Format Write Command Format±2. Serial Command Codes ±2. Serial Command Codes DIN 8 Projector Dsub 9 Computer Blank