Installing and Composition
How to install the projector using the tripod
*You can install this projector using a tripod for the camera. You can assemble the projector instead of the camera on camera tripod.
*When stabilizing the tripod, we recommend using the locking bolt of the standard size 4.5 mm or less.The maximum size allowed for the locking bolt is 6.5 mm.(If it is longer than the maximum allowed size, it may damage the projector.)
Part connected to the projector
Part connected to the tripod
+
=
Bottom side of Projector
Camera Tripod
Finished condition when projector is install on the tripod
Kensington Security System
• This projector has a Kensington Security System Connector on the side panel. Connect the Kensington Security System cable as below.
• For the detailed installation and use of the Kensington Security System, refer to the user’s guide included with the Kensington Security System set. And for further information, contact http://www.kensington.com, the internet homepage of the Kensington company that deals with expensive electronic equipment such as notebook PCs or projectors.
• The Kensington Security System is an optional item.
13