LG Electronics HX301G Turning on the Projector, Turning off the Projector, Selecting input mode

Page 14

Installing and Composition

Turning on the Projector

1.Make sure the power cord is connected correctly.

2.Press the POWER button on the top cover or the POWER button on the remote control. (The light on the control panel will be turned on.)

•  Press the INPUT button on the remote control to select the input signal you want.

•  When you press the POWER button on the remote control or the POWER button on the control panel when you turn on the projector, the lights for all buttons on the control panel will be turned on.

•  Check if the lens door is open before turning on the power.

Turning off the Projector

Press the POWER button on the top cover or the POWER button on the remote control.

Focus and Position of the Screen Image

When an image appears on the screen, check if it is in focus and fits the screen properly.

Focus ring

•  To adjust the focus of the image, rotate the focus ring.

Selecting input mode

1.Press the INPUT button on the remote control.

2.Selecting an input signal with the INPUT button will only change the projector only to connected inputs. You can change it to any inputs with the , button.

Input

Video

Component

RGB

HDMI

•  The component input is always active, and it does not support plug &play function.

14

Image 14
Contents DLP Projector DLP Projector Contents Safety Instructions Indoor InstallationUsing Cleaning Control Panel Names of partsMain Body Connecting Part USB Hdmi Video RGBRemote Control Installing BatteriesAccessories Optional ExtrasInstalling and Composition Installation PrecautionsBasic Operation of the Projector Projection distance based on the picture formatHow to install the projector using the tripod Kensington Security SystemTurning off the Projector Selecting input modeTurning on the Projector Focus and Position of the Screen ImageHow to connect Connecting to a Desktop PCConnecting to a Video Source ConnectionHow to connect a Hdmi source Connecting to a DVD PlayerConnecting to a D-TV Set-Top Box Function Picture modeAdjusting Picture Mode Picture Menu OptionsDynamic Contrast Color TemperatureAdvanced Control Function Dynamic ColorColor Temperature Function Picture Reset FunctionUsing Keystone Function To Change PJT ModeUsing Aspect Ratio Function Screen Menu OptionsUsing the Still Function Auto Configure FunctionRGB Config. Function Recommended use range of FM receiver What is FM Wireless Audio? HX300G onlyAudio Menu Options Recommended length of FM receiver AntennaInstalling Instructions HX300G only To listen through the FM receiver speaker HX300G only Adjusting VolumePress the Volume ∧, ∨ button on the remote control Function AudioAdjusting Speaker Balance Adjusting TrebleAuto Off Function Time Menu OptionsSleep time Function Selecting Language Using Blank FunctionOption Menu Options Selecting Blank imageTo adjust the brightness of the screen Screen Capture FunctionInformation Menu Options Demo Mode FunctionInitial Setting Function To See The Projector InformationEject USB Connecting the USB deviceTo use the USB device Precautions when using the USB device Screen Components Photo Selection and Popup MenuFull Screen Menu Option Set values for Slide Speed and Music FolderMusic List Music Selection and Popup MenuMovie List Supported Movie FilePrecautions when playing the DivX Movie Selection and Popup Menu Music List Page 1/1Playing the Movie Option Menu SelectionYou can see the DivX registration code of the projector To See The DivX Registration CodeDeactivation Function File Viewer View FileCleaning the Projector Case MaintenanceCleaning the lens InformationHX300G HX300G-JE / HX301G HX301G-JE SpecificationsOperating Condition Temperature HumidityLinux kernel 2.6, busybox, lzo, u-boot UClibcModel Serial
Related manuals
Manual 2 pages 26.36 Kb