LG Electronics HX300G Auto Configure Function, RGB Config. Function, Using the Still Function

Function

Auto Configure Function

*This function assures you of getting the best video quality by automatically adjusting the horizontal size and synchronization of the image.

*Auto Tracking function works in RGB PC input only.

Press the AUTO button of the remote control.

•	If you execute screen adjustment for a video from PC graphic signal, optimal	Auto config.
	state may not be found. Execute the Auto Config. function for a still image.
•	You can use this function through the MENU button.

RGB Config. Function

1. Press the MENU button. Then, move to SCREEN with the

∧, ∨, ＜, ＞ buttons and press the ◉OK button.

RGB Config. ꔂMove ꕉ Prev.

2.	Press the ∧, ∨ buttons to move to RGB Config. and press
	the ◉OK button.
3.	Move to a desired item with the ∧, ∨ buttons and then
	press the ＞ button.
4.	Press the ∧, ∨, ＜, ＞ button to adjust the screen condi-
	tion as you want and then press the ◉OK button.

Resolution ꔃ

Auto Config.

Position

Size

Phase

Reset

ꔐ1024 x 768 1280 x 768 1360 x 768

•  Resolution can be chosen between 768 resolution (1024x768/1280x768/1360x768, 60Hz). •  Press the BACK button to exit the menu screen.

Using the Still Function

1.Press the STILL button on the remote control.

*You can freeze the moving image.

< Moving Image > < Still Image >

2.To exit STILL, press any button.

*The STILL function will release automatically after approximately 10 minutes.

21