Function
Installing Instructions (HX300G only)
• If used in a medical institution, it may cause an error for medical equipments. Please do not use in a medical establishment.
• Please maintain the distance between the projector and FM receiver within 3 m.
• The sound from FM receiver may not come out in the desired quality if the distance is more than 3 m.
• Please adjust the location of FM receiver and its antenna and install them to where it shows a good con- dition of receiving reception.
• According to the installed location and environment, the receiving distance may become shorter and the sound may be interrupted due to:
-If an obstacle is located near the projector and FM receiver.
-If an obstacle passes near by the projector and FM receiver.
-If the FM receiver is installed Left, Right, or diagonal line of projector
-If the Projector or the FM receiver is located inside of a rack made of metal.
-If other FM transmitter equipment is working near at the same frequency.
-If there is a radio broadcast on air at the same frequency.
-If working in the dusty, humid, or high temperature environment.
What do I do if the FM receiving signal is not good? (HX300G only)
• Please adjust the antenna of FM receiver or move the location of FM receiver.
• If there is no Audio signal or low reception, within 55 seconds the FM Wireless Audio function will shut down automatically.
• Please check the incoming audio signal.
• Please check if the power of projector or FM receiver is on.
• Please check if there is any obstacle between the projector and FM receiver.
• Please check if there is any metallic hardware or electronic product nearby.
• Please check if there is any radio broadcasting channel using the same frequency.
• If there is a radio broadcasting channel using the same frequency, please change to a different frequency on the projector.
• Please move the location of adaptor or cables which are connected to projector. Adaptor or cables may affect the receiving reception.
23