LG Electronics HX301G, HX300G Connecting to a DVD Player, Connecting to a D-TV Set-Top Box

Connection

Connecting to a DVD Player

* Depending on the equipment, the component output jacks (Y, PB, PR) of the DVD Player may be labeled as Y, Pb, Pr/Y, B-Y, R-Y/Y, Cb, Cr.

< How to connect a HDMI source > HDMI Cable

1. Connect the HDMI of the projector and the HDMI out- put port of the DVD Player with an HDMI cable.

2.Set the DVD Player's resolution to one of the following: 480p(576p)/720p/1080i/1080p mode.

< How to connect a Component source >

1. After connecting the Component cable of DVD Player to the RGB to Component cable, connect it to the RGB IN terminal of the projector.

* When connecting the component cable, match the jack colors with the component cable.(Y=green, PB=blue, PR

=red)RGB to Component Cable

2.Connect the AUDIO IN of the projector to the output jacks of the audio source with an audio cable.

<DVD Player>

Audio Cable

<DVD Player>

Component cable

Connecting to a D-TV Set-Top Box

*To receive Digital TV (D-TV) programs, it is necessary to purchase a D-TV receiver (Set-Top Box) and connect it to the projector.

*Please refer to the owner's manual of the D-TV Set-Top Box for the connection between the projector and D-TV Set-Top Box.

< How to connect a HDMI source >

<D-TV Set-Top Box>

1.Connect the HDMI of the projector and the HDMI out- put port of the DTV set-top box with an HDMI cable.

2.Set the DTV receiver's resolution to one of the follow- ing: 480p(576p)/720p/1080i/1080p mode.

< How to connect a Component source >

1.Connect the D-TV Set-Top Box Component cable with RGB to Component cable and than connect it to RGB IN of the projector.

*When connecting the component cable, match the jack colors with the component cable.(Y=green, PB=blue, PR =red)

2.Connect the AUDIO IN of the projector to the output jacks of the audio source with an audio cable.

HDMI Cable

Audio Cable

	<D-TV Set-Top Box>
RGB to Component	Component cable
Cable

16